[Sat Jun 29 11:38:07 2013] Detection parameters:
  Position = (213.4, 290.4) = 8 16 53.23 48 24 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.7 +/- 17.7
  Background counts = 112.1
  Rate = 0.001 +/- 0.0003

[Sat Jun 29 11:38:07 2013] Off-axis axis estimate = 6.19'
[Sat Jun 29 11:38:30 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:30 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Sat Jun 29 11:38:30 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.864
[Sat Jun 29 11:38:30 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.52"
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 29 11:38:31 2013] Fit fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src14 appears to have run properly
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:42 2013] Source 21 is offset by -2.172457 and -8.995985 pixels which is larger than
2 X fitted extent = 1.052175 x 1.052175, not incorporating fit results
[Sat Jun 29 11:38:42 2013] Spatial fit model total counts = 367.702000, observed total counts = 371.000000
[Sat Jun 29 11:38:42 2013] Offset between fit and detection position for source 21 = 0.264783 pixels
[Sat Jun 29 11:38:42 2013] 369.007200 total counts/ 320.503000 bgd. counts: snr = 2.709339
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.264783 pixels
  Position = (213.3, 290.2) = 8 16 53.30 48 24 30.5
  Extent = 4.4" x 4.4", rotation angle = 0
  Source counts = 48.5 +/- 19.2
  Background counts = 320.5
  Rate = 0.0007 +/- 0.0003
[Sat Jun 29 11:38:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:42 2013] Assessing source extent using major
[Sat Jun 29 11:38:42 2013] Source does appear to be extended
[Sat Jun 29 11:38:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:58 2013] Initial guess for spatial extent in simple fitting = 4.42"
[Sat Jun 29 11:38:58 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Sat Jun 29 11:38:58 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.42"
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14.csv
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:10 2013] Spatial fit model total counts = 413.497000, observed total counts = 371.000000
[Sat Jun 29 11:39:10 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 11:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:10 2013] Assessing source extent using major
[Sat Jun 29 11:39:10 2013] Source does appear to be extended
[Sat Jun 29 11:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:47 2013] XMMSAS src. selection expression = ellipse(18505.550600, 25198.899200, 265.060208, 265.060208, 0.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Not overwriting source region fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.reg
[Sat Jun 29 11:39:47 2013] Extracting stamp from image fullrun_mos1_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (198, 275) - (228, 305)
[Sat Jun 29 11:39:47 2013] XMMSAS bgd. selection expression = annulus(18505.550600, 25198.899200, 441.767013, 883.534025, X, Y) && !ellipse(19418.449600, 25159.978333, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Writing fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21.gif
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:47 2013] Mean detx,y = (-2855.70, 5940.16) 
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:47 2013] Setting source spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.pi.gz
[Sat Jun 29 11:39:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat Jun 29 11:39:51 2013] Not generating rmf since there are only 48 counts
[Sat Jun 29 11:39:51 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:48 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:48 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_src.pi.gz = 91.00
[Sat Jun 29 11:54:48 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 161.00
[Sat Jun 29 11:54:48 2013] Got source and background scale factors 228800.000000, 901528.000000
[Sat Jun 29 11:54:48 2013] User source parameters:
  Position = (213.3, 290.2) = 8 16 53.30 48 24 30.5
  Extent = 4.4" x 4.4", rotation angle = 0
  Source aperture counts = 50.1 +/- 10.6
  Background aperture counts = 40.9
  Rate = 0.0007 +/- 0.0001

[Sat Jun 29 11:54:50 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:55 2013] Flag b found in src. 21 procflags, skipping spectral fitting
[Sat Jun 29 11:54:55 2013] Flag p found in src. 21 procflags, skipping spectral fitting
[Sat Jun 29 11:54:55 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 29 11:54:56 2013] xmm0604810101/analysis//spectral/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete