[Sat Jun 29 11:38:06 2013] Detection parameters:
  Position = (473.0, 296.3) = 8 14 59.81 48 24 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.2 +/- 16.4
  Background counts = 69.2
  Rate = 0.0008 +/- 0.0002

[Sat Jun 29 11:38:07 2013] Off-axis axis estimate = 12.66'
[Sat Jun 29 11:38:30 2013] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:30 2013] Initial guess for spatial extent in simple fitting = 12.76"
[Sat Jun 29 11:38:30 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.891
[Sat Jun 29 11:38:30 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.76"
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 29 11:38:31 2013] Fit fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src27 appears to have run properly
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 29 11:38:31 2013] Fit fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun 29 11:38:42 2013] Spatial fit model total counts = 433.312000, observed total counts = 423.000000
[Sat Jun 29 11:38:42 2013] Offset between fit and detection position for source 18 = 5.714764 pixels
[Sat Jun 29 11:38:42 2013] 421.183000 total counts/ 250.827000 bgd. counts: snr = 10.756483
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.714764 pixels
  Position = (477.8, 293.1) = 8 14 57.74 48 24 42.0
  Extent = 25.5 (25.5-51.0)", rotation angle = 0
  Source counts = 170.4 +/- 20.5
  Background counts = 250.8
  Rate = 0.002 +/- 0.0003
[Sat Jun 29 11:38:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:42 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 11:38:42 2013] Source does appear to be extended
[Sat Jun 29 11:38:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:42 2013] Source is confused with source 3
[Sat Jun 29 11:38:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:58 2013] Initial guess for spatial extent in simple fitting = 25.52"
[Sat Jun 29 11:38:58 2013] source mask rpix=5.9, npix_max = 162, mask sum = 169, frac = 1.043
[Sat Jun 29 11:38:58 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 25.52"
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:59 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:10 2013] Source 18 is offset by 2.197598 and 3.585448 pixels which is larger than
2 X fitted extent = 23.443081 x 2.932759, not incorporating fit results
[Sat Jun 29 11:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:10 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 11:39:10 2013] Source does appear to be extended
[Sat Jun 29 11:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:47 2013] XMMSAS src. selection expression = ellipse(41518.210000, 25454.454000, 1530.900044, 1530.900044, 0.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Not overwriting source region fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun 29 11:39:47 2013] Extracting stamp from image fullrun_mos1_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (390, 205) - (566, 381)
[Sat Jun 29 11:39:47 2013] XMMSAS bgd. selection expression = annulus(41518.210000, 25454.454000, 2551.500073, 5103.000147, X, Y) && !ellipse(36001.126200, 28052.639200, 470.388014, 470.388014, 0.000000, X, Y) && !ellipse(41152.730499, 21908.134293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42432.775879, 24617.494781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42137.255188, 25746.322968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41125.819122, 27681.637543, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Writing fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18.gif
[Sat Jun 29 11:39:48 2013] ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:48 2013] Mean detx,y = (3518.79, -16096.05) 
[Sat Jun 29 11:39:48 2013] ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:48 2013] ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.pi and ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:48 2013] Setting source spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.pi.gz
[Sat Jun 29 11:39:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun 29 11:39:48 2013] ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Jun 29 11:54:49 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:49 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_src.pi.gz = 1145.00
[Sat Jun 29 11:54:49 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 5144.00
[Sat Jun 29 11:54:50 2013] Got source and background scale factors 6692562.000000, 28173414.000000
[Sat Jun 29 11:54:50 2013] User source parameters:
  Position = (477.8, 293.1) = 8 14 57.74 48 24 42.0
  Extent = 25.5 (25.5-51.0)", rotation angle = 0
  Source aperture counts = -77.0 +/- 34.8
  Background aperture counts = 1222.0
  Rate = -0.001 +/- 0.0005

[Sat Jun 29 11:54:50 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:55 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Sat Jun 29 11:54:55 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Sat Jun 29 11:54:55 2013] Source 18 has no response, skipping
[Sat Jun 29 11:54:56 2013] xmm0604810101/analysis//spectral/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete