[Thu Mar 29 20:45:12 2012] Detection parameters:
  Position = (279.9, 284.0) = 21 27 7.91 -12 10 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 789.8 +/- 55.3
  Background counts = 788.3
  Rate = 0.01 +/- 0.0008

[Thu Mar 29 20:45:16 2012] Off-axis axis estimate = 1.70'
[Thu Mar 29 20:54:27 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:54:27 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Mar 29 20:54:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Mar 29 20:54:27 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.28"
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Mar 29 23:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25.csv
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Mar 29 23:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25.csv
[Thu Mar 29 23:41:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Mar 29 23:41:32 2012] Fit fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Mar 30 06:40:15 2012] Spatial fit model total counts = 7899.870000, observed total counts = 7829.000000
[Fri Mar 30 06:40:15 2012] Offset between fit and detection position for source 30 = 6.352097 pixels
[Fri Mar 30 06:40:15 2012] 7840.451000 total counts/ 7349.410000 bgd. counts: snr = 5.727848
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 6.352097 pixels
  Position = (273.6, 283.1) = 21 27 9.78 -12 10 10.8
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 491.0 +/- 88.5
  Background counts = 7349.4
  Rate = 0.008 +/- 0.001
[Fri Mar 30 06:40:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 06:40:15 2012] Source does appear to be extended
[Fri Mar 30 06:40:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:41:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:41:21 2012] Initial guess for spatial extent in simple fitting = 14.56"
[Fri Mar 30 06:41:21 2012] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.946
[Fri Mar 30 06:41:21 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 14.56"
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26.csv
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26.csv
[Fri Mar 30 08:56:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 08:56:53 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Mar 30 08:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Mar 30 08:56:53 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Mar 30 08:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Mar 30 08:56:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:27 2012] Warning, spatial fit 26 centroid is now closest to src. 32
[Fri Mar 30 15:38:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:28 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 15:38:28 2012] Source does appear to be extended
[Fri Mar 30 15:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 15:39:30 2012] XMMSAS src. selection expression = ellipse(23756.928000, 24582.413600, 873.540025, 873.540025, 0.000000, X, Y)
[Fri Mar 30 15:39:30 2012] Writing source region out to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30_src.reg
[Fri Mar 30 15:39:30 2012] Extracting stamp from image fullrun_pn_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (223, 233) - (324, 333)
[Fri Mar 30 15:39:30 2012] XMMSAS bgd. selection expression = annulus(23756.928000, 24582.413600, 1455.900042, 2911.800084, X, Y) && !ellipse(20697.867065, 25281.185730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20953.934021, 24212.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22268.216003, 23938.202881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22845.215200, 25119.492000, 1236.248036, 1236.248036, 0.000000, X, Y) && !ellipse(22027.909302, 26961.540497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.535200, 25427.015320, 352.445610, 352.445610, 0.000000, X, Y) && !ellipse(26396.566193, 25005.466248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21714.114044, 24110.333740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.947937, 23441.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25292.618000, 24345.699200, 1147.216033, 1147.216033, 0.000000, X, Y) && !ellipse(25723.779114, 24146.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22628.139740, 23702.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.007965, 22923.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.350525, 22574.083344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24830.292725, 22471.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.413727, 21880.060013, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 15:39:30 2012] Writing fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30.gif
[Fri Mar 30 17:17:15 2012] Mean detx,y = (640.85, -363.73) 
[Fri Mar 30 17:17:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 17:18:00 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 17:18:01 2012] Setting source spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar 30 17:18:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Mar 31 13:55:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:31 2012] Error reading totcts from fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Mar 31 13:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:35 2012] Using photon index=1.80, rate=0.00827, arf fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src30.arf
[Sat Mar 31 13:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:35 2012] Updating source flux to 1.9e-14