[Thu Mar 29 20:45:11 2012] Detection parameters:
  Position = (384.4, 326.2) = 21 26 36.92 -12 7 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.0 +/- 32.8
  Background counts = 451.5
  Rate = 0.003 +/- 0.0004

[Thu Mar 29 20:45:16 2012] Off-axis axis estimate = 6.55'
[Thu Mar 29 20:54:27 2012] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:54:27 2012] Initial guess for spatial extent in simple fitting = 9.70"
[Thu Mar 29 20:54:27 2012] source mask rpix=2.2, npix_max = 29, mask sum = 11, frac = 0.369
[Thu Mar 29 20:54:27 2012] Skipping simple spatial due to low active detector fraction
[Fri Mar 30 06:40:15 2012] Spatial fit model total counts = 2367.670000, observed total counts = 2240.000000
[Fri Mar 30 06:40:15 2012] Offset between fit and detection position for source 22 = 3.615162 pixels
[Fri Mar 30 06:40:15 2012] Warning, changing simple spatial fit ID from -1 to 46
[Fri Mar 30 06:40:15 2012] 2353.036000 total counts/ 1977.500000 bgd. counts: snr = 8.444877
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.615162 pixels
  Position = (381.0, 327.4) = 21 26 37.93 -12 6 58.0
  Extent = 19.2 (13.1-38.4)", rotation angle = 0
  Source counts = 375.5 +/- 48.5
  Background counts = 1977.5
  Rate = 0.006 +/- 0.0008
[Fri Mar 30 06:40:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 06:40:15 2012] Source does appear to be extended
[Fri Mar 30 06:40:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:40:15 2012] Source is confused with source 51
[Fri Mar 30 06:40:15 2012] Source is confused with source 52
[Fri Mar 30 06:40:15 2012] Source is confused with source 53
[Fri Mar 30 06:41:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:41:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 06:41:21 2012] Initial guess for spatial extent in simple fitting = 19.18"
[Fri Mar 30 06:41:21 2012] source mask rpix=4.4, npix_max = 96, mask sum = 74, frac = 0.768
[Fri Mar 30 06:41:21 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 19.18"
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20.csv
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20.csv
[Fri Mar 30 08:56:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Mar 30 08:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:27 2012] Warning, spatial fit 20 centroid is now closest to src. 3
[Fri Mar 30 15:38:28 2012] Spatial fit model total counts = 2363.480000, observed total counts = 2240.000000
[Fri Mar 30 15:38:28 2012] Offset between fit and detection position for source 22 = 0.131136 pixels
[Fri Mar 30 15:38:28 2012] Warning, changing simple spatial fit ID from 20 to 41
[Fri Mar 30 15:38:28 2012] 2347.810000 total counts/ 1995.930000 bgd. counts: snr = 7.876294
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.131136 pixels
  Position = (381.0, 327.6) = 21 26 37.94 -12 6 57.5
  Extent = 19.2 (19.1-38.4)", rotation angle = 0
  Source counts = 351.9 +/- 48.5
  Background counts = 1995.9
  Rate = 0.006 +/- 0.0008
[Fri Mar 30 15:38:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:28 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 15:38:28 2012] Source does appear to be extended
[Fri Mar 30 15:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 15:39:30 2012] XMMSAS src. selection expression = ellipse(33095.191600, 28448.722000, 1150.770033, 1150.770033, 0.000000, X, Y)
[Fri Mar 30 15:39:30 2012] Writing source region out to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22_src.reg
[Fri Mar 30 15:39:30 2012] Extracting stamp from image fullrun_pn_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (315, 261) - (447, 394)
[Fri Mar 30 15:39:30 2012] XMMSAS bgd. selection expression = annulus(33095.191600, 28448.722000, 1917.950055, 3835.900110, X, Y) && !ellipse(37001.650604, 29562.593048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35570.903107, 29682.024231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36954.122925, 30091.573120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.405731, 28892.333557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32961.694305, 28728.189026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34142.279633, 28129.859589, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 15:39:30 2012] Writing fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22.gif
[Fri Mar 30 17:07:30 2012] Mean detx,y = (-7114.41, 6015.64) 
[Fri Mar 30 17:07:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 17:08:40 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 17:08:41 2012] Setting source spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Mar 30 17:08:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Mar 31 13:55:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:31 2012] Error reading totcts from fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Mar 31 13:55:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:34 2012] Using photon index=1.80, rate=0.00593, arf fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src22.arf
[Sat Mar 31 13:55:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:34 2012] Updating source flux to 2.4e-14
[Sat Mar 31 14:09:31 2012] Flag c found in src. 22 procflags, skipping spectral fitting