[Thu Mar 29 20:45:10 2012] Detection parameters:
  Position = (301.8, 217.8) = 21 27 1.42 -12 14 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1838.2 +/- 59.0
  Background counts = 473.3
  Rate = 0.04 +/- 0.001

[Thu Mar 29 20:45:16 2012] Off-axis axis estimate = 5.85'
[Thu Mar 29 20:54:27 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:54:27 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Thu Mar 29 20:54:27 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.890
[Thu Mar 29 20:54:27 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.35"
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Mar 29 23:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13.csv
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Mar 29 23:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13.csv
[Thu Mar 29 23:41:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Mar 29 23:41:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Mar 29 23:41:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Mar 29 23:41:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:40:15 2012] Warning, spatial fit 13 centroid is now closest to src. 13
[Fri Mar 30 06:40:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:15 2012] Assessing source extent using major
[Fri Mar 30 06:40:15 2012] Source does appear to be extended
[Fri Mar 30 06:40:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:41:21 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:41:21 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Fri Mar 30 06:41:21 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.890
[Fri Mar 30 06:41:21 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.35"
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13.csv
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13.csv
[Fri Mar 30 08:56:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Mar 30 08:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:27 2012] Warning, spatial fit 13 centroid is now closest to src. 13
[Fri Mar 30 15:38:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:28 2012] Assessing source extent using major
[Fri Mar 30 15:38:28 2012] Source does appear to be extended
[Fri Mar 30 15:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 15:39:29 2012] Counts = 1838.203125, rescaling region sizes by 2.000000
[Fri Mar 30 15:39:29 2012] XMMSAS src. selection expression = ellipse(26208.128143, 18898.328033, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 30 15:39:29 2012] Writing source region out to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15_src.reg
[Fri Mar 30 15:39:29 2012] Extracting stamp from image fullrun_pn_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (227, 143) - (377, 293)
[Fri Mar 30 15:39:29 2012] XMMSAS bgd. selection expression = annulus(26208.128143, 18898.328033, 4350.000000, 8700.000000, X, Y) && !ellipse(17142.427063, 27520.551605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20697.867065, 25281.185730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20953.934021, 24212.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22268.216003, 23938.202881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22845.215200, 25119.492000, 1236.248036, 1236.248036, 0.000000, X, Y) && !ellipse(34095.405800, 22971.024800, 453.531213, 453.531213, 0.000000, X, Y) && !ellipse(29305.965881, 21518.691940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.625977, 20097.749466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21921.718750, 19271.522934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.988312, 18226.139664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21744.998672, 9445.900032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24361.690674, 11086.166512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33095.191600, 28448.722000, 1534.360044, 1534.360044, 0.000000, X, Y) && !ellipse(16957.566666, 26723.251617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19640.319778, 10565.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.909302, 26961.540497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.535200, 25427.015320, 352.445610, 352.445610, 0.000000, X, Y) && !ellipse(26396.566193, 25005.466248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23756.928000, 24582.413600, 1164.720034, 1164.720034, 0.000000, X, Y) && !ellipse(21714.114044, 24110.333740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.947937, 23441.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28026.040600, 18754.538000, 285.558408, 285.558408, 0.000000, X, Y) && !ellipse(20183.676834, 18497.103989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.670715, 11015.572601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.536041, 10411.169121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34142.279633, 28129.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25292.618000, 24345.699200, 1147.216033, 1147.216033, 0.000000, X, Y) && !ellipse(25723.779114, 24146.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22628.139740, 23702.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.007965, 22923.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.350525, 22574.083344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24830.292725, 22471.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.413727, 21880.060013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16924.360214, 21387.074173, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 15:39:29 2012] Writing fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15.gif
[Fri Mar 30 16:45:57 2012] Mean detx,y = (-3555.08, -4886.12) 
[Fri Mar 30 16:46:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 16:51:18 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 16:51:19 2012] Setting source spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Mar 30 16:51:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Mar 31 01:37:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:37:06 2012] rmf not generated due to insufficient counts
[Sat Mar 31 13:55:30 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:30 2012] Error reading totcts from fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Mar 31 13:55:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:34 2012] Using photon index=1.80, rate=0.0365, arf fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src15.arf
[Sat Mar 31 13:55:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:34 2012] Updating source flux to 1.2e-13
[Sat Mar 31 14:09:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting