[Thu Mar 29 20:45:10 2012] Detection parameters:
  Position = (263.9, 288.9) = 21 27 12.66 -12 9 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1598.0 +/- 67.4
  Background counts = 725.9
  Rate = 0.02 +/- 0.0009

[Thu Mar 29 20:45:16 2012] Off-axis axis estimate = 2.60'
[Thu Mar 29 20:54:27 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:54:27 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Thu Mar 29 20:54:27 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Thu Mar 29 20:54:27 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.73"
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src8.ximg exists
[Thu Mar 29 23:41:31 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Mar 29 23:41:31 2012] Fit fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_src8 appears to have run properly
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Mar 29 23:41:32 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Mar 29 23:41:32 2012] Fit fullrun_pn_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Mar 30 06:40:15 2012] Spatial fit model total counts = 8479.890000, observed total counts = 8404.000000
[Fri Mar 30 06:40:15 2012] Offset between fit and detection position for source 10 = 0.886856 pixels
[Fri Mar 30 06:40:15 2012] 8377.180000 total counts/ 7068.620000 bgd. counts: snr = 15.564183
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.886856 pixels
  Position = (263.1, 289.3) = 21 27 12.89 -12 9 44.0
  Extent = 15.5 (15.4-30.9)", rotation angle = 0
  Source counts = 1308.6 +/- 91.5
  Background counts = 7068.6
  Rate = 0.02 +/- 0.002
[Fri Mar 30 06:40:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 06:40:15 2012] Source does appear to be extended
[Fri Mar 30 06:40:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:41:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:41:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 06:41:21 2012] Initial guess for spatial extent in simple fitting = 15.45"
[Fri Mar 30 06:41:21 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.974
[Fri Mar 30 06:41:21 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 15.45"
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8.csv
[Fri Mar 30 08:56:51 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Mar 30 08:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8.csv
[Fri Mar 30 08:56:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Mar 30 08:56:52 2012] fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Mar 30 08:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Mar 30 08:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:27 2012] Warning, spatial fit 8 centroid is now closest to src. 27
[Fri Mar 30 15:38:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:28 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 15:38:28 2012] Source does appear to be extended
[Fri Mar 30 15:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 15:39:29 2012] Counts = 1308.560000, rescaling region sizes by 2.000000
[Fri Mar 30 15:39:29 2012] XMMSAS src. selection expression = ellipse(22845.215200, 25119.492000, 1854.372053, 1854.372053, 0.000000, X, Y)
[Fri Mar 30 15:39:29 2012] Writing source region out to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 30 15:39:29 2012] Extracting stamp from image fullrun_pn_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (157, 183) - (370, 396)
[Fri Mar 30 15:39:29 2012] XMMSAS bgd. selection expression = annulus(22845.215200, 25119.492000, 6181.240178, 12362.480356, X, Y) && !ellipse(12256.421400, 17793.688000, 465.983213, 465.983213, 0.000000, X, Y) && !ellipse(35570.903107, 29682.024231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11757.689133, 27948.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17142.427063, 27520.551605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20697.867065, 25281.185730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20953.934021, 24212.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22268.216003, 23938.202881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.405800, 22971.024800, 453.531213, 453.531213, 0.000000, X, Y) && !ellipse(29305.965881, 21518.691940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.625977, 20097.749466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21921.718750, 19271.522934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26208.128143, 18898.328033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.988312, 18226.139664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14834.439301, 12201.221069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33095.191600, 28448.722000, 1534.360044, 1534.360044, 0.000000, X, Y) && !ellipse(16957.566666, 26723.251617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26117.595200, 31966.687400, 416.764012, 416.764012, 0.000000, X, Y) && !ellipse(22027.909302, 26961.540497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.535200, 25427.015320, 352.445610, 352.445610, 0.000000, X, Y) && !ellipse(26396.566193, 25005.466248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23756.928000, 24582.413600, 1164.720034, 1164.720034, 0.000000, X, Y) && !ellipse(21714.114044, 24110.333740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.947937, 23441.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28026.040600, 18754.538000, 285.558408, 285.558408, 0.000000, X, Y) && !ellipse(20183.676834, 18497.103989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16855.888336, 32212.253876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17942.188263, 30257.108887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18551.221451, 29810.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.405731, 28892.333557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32961.694305, 28728.189026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34142.279633, 28129.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25292.618000, 24345.699200, 1147.216033, 1147.216033, 0.000000, X, Y) && !ellipse(25723.779114, 24146.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22628.139740, 23702.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.007965, 22923.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.350525, 22574.083344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24830.292725, 22471.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.413727, 21880.060013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16924.360214, 21387.074173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23265.256500, 34843.249847, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 15:39:29 2012] Writing fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10.gif
[Fri Mar 30 16:16:45 2012] Mean detx,y = (1421.98, -255.56) 
[Fri Mar 30 16:16:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 16:26:08 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 16:26:09 2012] Setting source spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 30 16:26:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Mar 31 13:55:30 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:30 2012] Error reading totcts from fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Mar 31 13:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:33 2012] Using photon index=1.80, rate=0.022, arf fullrun_pn_xmm0604740101_pi300-10000_pass1_cl_src10.arf
[Sat Mar 31 13:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:33 2012] Updating source flux to 4.7e-14