[Thu Mar 29 20:45:30 2012] Detection parameters:
  Position = (275.7, 273.1) = 21 27 9.16 -12 10 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.6 +/- 31.8
  Background counts = 225.2
  Rate = 0.004 +/- 0.0004

[Thu Mar 29 20:45:31 2012] Off-axis axis estimate = 2.47'
[Fri Mar 30 02:59:33 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:59:33 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Mar 30 02:59:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Fri Mar 30 02:59:33 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.66"
[Fri Mar 30 06:39:53 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Mar 30 06:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20.csv
[Fri Mar 30 06:39:53 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Mar 30 06:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20.csv
[Fri Mar 30 06:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Mar 30 06:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:40:54 2012] Source 56 is offset by -2.631651 and 0.390271 pixels which is larger than
2 X fitted extent = 0.917531 x 0.917531, not incorporating fit results
[Fri Mar 30 06:40:54 2012] Spatial fit model total counts = 4137.620000, observed total counts = 3612.000000
[Fri Mar 30 06:40:54 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 06:40:54 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:54 2012] Assessing source extent using major
[Fri Mar 30 06:40:54 2012] Source does appear to be extended
[Fri Mar 30 06:40:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 11:16:59 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 11:16:59 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Mar 30 11:16:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Fri Mar 30 11:16:59 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.66"
[Fri Mar 30 15:38:05 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Mar 30 15:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19.csv
[Fri Mar 30 15:38:05 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Mar 30 15:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19.csv
[Fri Mar 30 15:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:06 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Mar 30 15:38:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Mar 30 15:38:06 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Mar 30 15:38:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Mar 30 15:38:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:39:01 2012] Source 56 is offset by -1.977976 and 0.730478 pixels which is larger than
2 X fitted extent = 1.835058 x 1.835058, not incorporating fit results
[Fri Mar 30 15:39:02 2012] Spatial fit model total counts = 4149.160000, observed total counts = 3612.000000
[Fri Mar 30 15:39:02 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 15:39:02 2012] Source 56 is offset by 4.821473 and -4.830993 pixels which is larger than
2 X fitted extent = 1.639871 x 1.639871, not incorporating fit results
[Fri Mar 30 15:39:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:39:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:39:02 2012] Assessing source extent using major
[Fri Mar 30 15:39:02 2012] Source does appear to be extended
[Fri Mar 30 15:39:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 09:10:05 2012] XMMSAS src. selection expression = ellipse(23937.616119, 23706.851593, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 09:10:05 2012] Writing source region out to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56_src.reg
[Sat Mar 31 09:10:05 2012] Extracting stamp from image fullrun_mos2_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (238, 236) - (313, 311)
[Sat Mar 31 09:10:05 2012] XMMSAS bgd. selection expression = annulus(23937.616119, 23706.851593, 1087.500000, 2175.000000, X, Y) && !ellipse(22835.902000, 24923.114400, 1277.200037, 1277.200037, 0.000000, X, Y) && !ellipse(23212.867462, 23558.679718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22401.594055, 24665.927826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26381.958000, 23038.018000, 1165.464034, 1165.464034, 0.000000, X, Y) && !ellipse(21825.564000, 25191.412000, 2287.000066, 2287.000066, 0.000000, X, Y) && !ellipse(25744.094200, 25459.533600, 305.918409, 305.918409, 0.000000, X, Y) && !ellipse(24714.330000, 25185.965800, 1141.352033, 1141.352033, 0.000000, X, Y) && !ellipse(24670.507751, 24224.430969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21792.084000, 24428.046000, 1340.880039, 1340.880039, 0.000000, X, Y) && !ellipse(26443.140717, 24990.075043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21242.919357, 25160.782806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.998000, 24709.786000, 1144.136033, 1144.136033, 0.000000, X, Y) && !ellipse(22077.438873, 23540.091858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.042000, 23997.592000, 1182.912034, 1182.912034, 0.000000, X, Y) && !ellipse(21223.258000, 26273.424000, 1312.464038, 1312.464038, 0.000000, X, Y) && !ellipse(20707.222000, 23837.322000, 2681.760077, 2681.760077, 0.000000, X, Y)
[Sat Mar 31 09:10:05 2012] Writing fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56.gif
[Sat Mar 31 09:23:17 2012] Mean detx,y = (7.70, 1030.54) 
[Sat Mar 31 09:23:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 09:23:39 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 09:23:40 2012] Setting source spectrum file to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Mar 31 09:23:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Mar 31 11:42:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 11:42:48 2012] rmf not generated due to insufficient counts
[Sat Mar 31 13:55:43 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:43 2012] Error reading totcts from fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Mar 31 13:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:47 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src56.arf
[Sat Mar 31 13:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:47 2012] Updating source flux to 3.4e-14
[Sat Mar 31 14:02:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting