[Thu Mar 29 20:45:29 2012] Detection parameters:
  Position = (277.0, 279.0) = 21 27 8.77 -12 10 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 431.4 +/- 35.7
  Background counts = 229.9
  Rate = 0.005 +/- 0.0004

[Thu Mar 29 20:45:31 2012] Off-axis axis estimate = 2.10'
[Fri Mar 30 02:59:33 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:59:33 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Mar 30 02:59:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Fri Mar 30 02:59:33 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.48"
[Fri Mar 30 06:39:53 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Mar 30 06:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15.csv
[Fri Mar 30 06:39:53 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Mar 30 06:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15.csv
[Fri Mar 30 06:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Mar 30 06:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:40:54 2012] Warning, spatial fit 15 centroid is now closest to src. 56
[Fri Mar 30 06:40:54 2012] Spatial fit model total counts = 4021.490000, observed total counts = 4018.000000
[Fri Mar 30 06:40:54 2012] Offset between fit and detection position for source 48 = 1.571503 pixels
[Fri Mar 30 06:40:54 2012] Warning, changing simple spatial fit ID from 15 to 29
[Fri Mar 30 06:40:54 2012] 3946.188500 total counts/ 3891.870000 bgd. counts: snr = 0.870700
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 1.571503 pixels
  Position = (278.0, 277.8) = 21 27 8.48 -12 10 34.0
  Extent = 5.2 (1.8-10.3)", rotation angle = 0
  Source counts = 54.3 +/- 62.8
  Background counts = 3891.9
  Rate = 0.0006 +/- 0.0007
  Deleting source due to low Poisson probability