[Thu Mar 29 20:45:28 2012] Detection parameters:
  Position = (244.7, 289.8) = 21 27 18.35 -12 9 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.1 +/- 23.8
  Background counts = 167.6
  Rate = 0.002 +/- 0.0003

[Thu Mar 29 20:45:31 2012] Off-axis axis estimate = 3.94'
[Fri Mar 30 02:59:33 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:59:33 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Mar 30 02:59:33 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri Mar 30 02:59:33 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.40"
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44.csv
[Fri Mar 30 06:39:54 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri Mar 30 06:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44.csv
[Fri Mar 30 06:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:39:55 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri Mar 30 06:39:55 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri Mar 30 06:39:55 2012] Fit fullrun_mos2_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri Mar 30 06:40:54 2012] Warning, spatial fit 44 centroid is now closest to src. 45
[Fri Mar 30 06:40:54 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:54 2012] Assessing source extent using major
[Fri Mar 30 06:40:54 2012] Source does appear to be extended
[Fri Mar 30 06:40:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:40:54 2012] Source is confused with source 45
[Fri Mar 30 11:16:59 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 11:16:59 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Mar 30 11:16:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri Mar 30 11:16:59 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.40"
[Fri Mar 30 15:38:05 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43.ximg exists
[Fri Mar 30 15:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43.csv
[Fri Mar 30 15:38:05 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Mar 30 15:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43.csv
[Fri Mar 30 15:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 15:38:06 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Mar 30 15:38:06 2012] fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Mar 30 15:38:06 2012] Fit fullrun_mos2_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Mar 30 15:39:02 2012] Source 40 is offset by -2.254582 and 1.778331 pixels which is larger than
2 X fitted extent = 0.997940 x 0.997940, not incorporating fit results
[Fri Mar 30 15:39:02 2012] Source 40 is offset by 4.452774 and -4.739508 pixels which is larger than
2 X fitted extent = 0.965600 x 0.965600, not incorporating fit results
[Fri Mar 30 15:39:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:39:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:39:02 2012] Assessing source extent using major
[Fri Mar 30 15:39:02 2012] Source does appear to be extended
[Fri Mar 30 15:39:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 09:10:06 2012] XMMSAS src. selection expression = ellipse(21242.919357, 25160.782806, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 09:10:06 2012] Writing source region out to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40_src.reg
[Sat Mar 31 09:10:06 2012] Extracting stamp from image fullrun_mos2_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (207, 252) - (282, 327)
[Sat Mar 31 09:10:06 2012] XMMSAS bgd. selection expression = annulus(21242.919357, 25160.782806, 1087.500000, 2175.000000, X, Y) && !ellipse(19194.607020, 25268.991800, 345.871210, 345.871210, 0.000000, X, Y) && !ellipse(22835.902000, 24923.114400, 1277.200037, 1277.200037, 0.000000, X, Y) && !ellipse(23212.867462, 23558.679718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22401.594055, 24665.927826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.616119, 23706.851593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21825.564000, 25191.412000, 2287.000066, 2287.000066, 0.000000, X, Y) && !ellipse(21792.084000, 24428.046000, 1340.880039, 1340.880039, 0.000000, X, Y) && !ellipse(20777.954697, 24225.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22155.121480, 26971.930600, 251.327207, 251.327207, 0.000000, X, Y) && !ellipse(22077.438873, 23540.091858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21223.258000, 26273.424000, 1312.464038, 1312.464038, 0.000000, X, Y) && !ellipse(20707.222000, 23837.322000, 2681.760077, 2681.760077, 0.000000, X, Y)
[Sat Mar 31 09:10:06 2012] Writing fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40.gif
[Sat Mar 31 09:39:04 2012] Mean detx,y = (-2965.10, 522.86) 
[Sat Mar 31 09:39:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 09:39:24 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 09:39:24 2012] Setting source spectrum file to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Mar 31 09:39:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Mar 31 13:01:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 13:01:19 2012] rmf not generated due to insufficient counts
[Sat Mar 31 13:55:44 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:44 2012] Error reading totcts from fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Mar 31 13:55:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:48 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0604740101_pi300-10000_pass1_cl_src40.arf
[Sat Mar 31 13:55:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:48 2012] Updating source flux to 1.7e-14
[Sat Mar 31 14:02:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting