[Thu Mar 29 20:45:22 2012] Detection parameters:
  Position = (256.9, 221.5) = 21 27 14.74 -12 14 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.4 +/- 19.5
  Background counts = 131.4
  Rate = 0.002 +/- 0.0003

[Thu Mar 29 20:45:23 2012] Off-axis axis estimate = 6.34'
[Thu Mar 29 23:41:33 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:41:33 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Thu Mar 29 23:41:33 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.819
[Thu Mar 29 23:41:33 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.60"
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 02:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:59:32 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Mar 30 02:59:32 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Mar 30 02:59:32 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Mar 30 06:40:33 2012] Source 52 is offset by 4.392468 and 8.299238 pixels which is larger than
2 X fitted extent = 3.139315 x 3.139315, not incorporating fit results
[Fri Mar 30 06:40:33 2012] Source 52 is offset by 9.950123 and -0.570118 pixels which is larger than
2 X fitted extent = 1.119637 x 1.119637, not incorporating fit results
[Fri Mar 30 06:40:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:33 2012] Assessing source extent using major
[Fri Mar 30 06:40:33 2012] Source does appear to be extended
[Fri Mar 30 06:40:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 08:56:54 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 08:56:54 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Mar 30 08:56:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.819
[Fri Mar 30 08:56:54 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.60"
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 11:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Mar 30 11:16:59 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Mar 30 15:38:42 2012] Spatial fit model total counts = 918.931000, observed total counts = 886.000000
[Fri Mar 30 15:38:42 2012] Offset between fit and detection position for source 52 = 0.319543 pixels
[Fri Mar 30 15:38:42 2012] 943.514000 total counts/ 821.317000 bgd. counts: snr = 4.263882
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.319543 pixels
  Position = (257.1, 221.7) = 21 27 14.69 -12 14 37.8
  Extent = 5.7 (4.2-7.4)", rotation angle = 0
  Source counts = 122.2 +/- 30.7
  Background counts = 821.3
  Rate = 0.001 +/- 0.0003
[Fri Mar 30 15:38:42 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:42 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 15:38:42 2012] Source does appear to be extended
[Fri Mar 30 15:38:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:08:14 2012] XMMSAS src. selection expression = ellipse(22318.412720, 19242.377400, 340.531810, 340.531810, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing source region out to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52_src.reg
[Sat Mar 31 03:08:14 2012] Extracting stamp from image fullrun_mos1_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (238, 202) - (277, 241)
[Sat Mar 31 03:08:14 2012] XMMSAS bgd. selection expression = annulus(22318.412720, 19242.377400, 567.553016, 1135.106033, X, Y) && !ellipse(23893.609009, 18395.498672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20672.324356, 19940.311539, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52.gif
[Sat Mar 31 03:44:36 2012] Mean detx,y = (6030.30, 56.01) 
[Sat Mar 31 03:44:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:45:03 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:45:04 2012] Setting source spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Mar 31 03:45:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Mar 31 13:55:37 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:37 2012] Error reading totcts from fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Mar 31 13:55:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:41 2012] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src52.arf
[Sat Mar 31 13:55:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:41 2012] Updating source flux to 2.1e-14
[Sat Mar 31 13:55:52 2012] Flag b found in src. 52 procflags, skipping spectral fitting