[Thu Mar 29 20:45:22 2012] Detection parameters:
  Position = (295.4, 224.2) = 21 27 3.32 -12 14 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.8 +/- 23.1
  Background counts = 134.8
  Rate = 0.003 +/- 0.0003

[Thu Mar 29 20:45:23 2012] Off-axis axis estimate = 5.38'
[Thu Mar 29 23:41:33 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:41:33 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Mar 29 23:41:33 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.741
[Thu Mar 29 23:41:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.12"
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27.csv
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27.csv
[Fri Mar 30 02:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:59:32 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Mar 30 02:59:32 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Mar 30 02:59:32 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Mar 30 06:40:33 2012] Source 51 is offset by -6.520081 and 7.078619 pixels which is larger than
2 X fitted extent = 2.145816 x 2.145816, not incorporating fit results
[Fri Mar 30 06:40:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:33 2012] Assessing source extent using major
[Fri Mar 30 06:40:33 2012] Source does appear to be extended
[Fri Mar 30 06:40:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 08:56:54 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 08:56:54 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Mar 30 08:56:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.741
[Fri Mar 30 08:56:54 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.12"
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22.csv
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22.csv
[Fri Mar 30 11:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Mar 30 11:16:59 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Mar 30 15:38:42 2012] Warning, spatial fit 22 centroid is now closest to src. 20
[Fri Mar 30 15:38:42 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:42 2012] Assessing source extent using major
[Fri Mar 30 15:38:42 2012] Source does appear to be extended
[Fri Mar 30 15:38:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:08:14 2012] XMMSAS src. selection expression = ellipse(25650.964935, 19459.315811, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing source region out to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51_src.reg
[Sat Mar 31 03:08:14 2012] Extracting stamp from image fullrun_mos1_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (258, 187) - (333, 262)
[Sat Mar 31 03:08:14 2012] XMMSAS bgd. selection expression = annulus(25650.964935, 19459.315811, 1087.500000, 2175.000000, X, Y) && !ellipse(26529.609600, 20092.369400, 444.564013, 444.564013, 0.000000, X, Y) && !ellipse(26217.766000, 18843.904000, 372.276811, 372.276811, 0.000000, X, Y) && !ellipse(23893.609009, 18395.498672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28027.792297, 18770.595901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.608000, 21749.434000, 1299.896037, 1299.896037, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51.gif
[Sat Mar 31 03:40:32 2012] Mean detx,y = (4825.18, -3085.02) 
[Sat Mar 31 03:40:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:41:00 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:41:01 2012] Setting source spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Mar 31 03:41:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sat Mar 31 08:18:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 08:18:49 2012] rmf not generated due to insufficient counts
[Sat Mar 31 13:55:37 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:37 2012] Error reading totcts from fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Mar 31 13:55:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:41 2012] Using photon index=1.80, rate=0.00334, arf fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src51.arf
[Sat Mar 31 13:55:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:41 2012] Updating source flux to 4.3e-14
[Sat Mar 31 13:55:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting