[Thu Mar 29 20:45:21 2012] Detection parameters:
  Position = (305.7, 252.2) = 21 27 0.28 -12 12 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.0 +/- 22.7
  Background counts = 202.8
  Rate = 0.001 +/- 0.0003

[Thu Mar 29 20:45:23 2012] Off-axis axis estimate = 3.39'
[Thu Mar 29 23:41:33 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:41:33 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Thu Mar 29 23:41:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.115
[Thu Mar 29 23:41:33 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.12"
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53.csv
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53.csv
[Fri Mar 30 02:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:59:33 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Mar 30 02:59:33 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Mar 30 02:59:33 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Mar 30 06:40:33 2012] Warning, spatial fit 53 centroid is now closest to src. 45
[Fri Mar 30 06:40:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:33 2012] Assessing source extent using major
[Fri Mar 30 06:40:33 2012] Source does appear to be extended
[Fri Mar 30 06:40:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 08:56:54 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 08:56:54 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Mar 30 08:56:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.115
[Fri Mar 30 08:56:54 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.12"
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41.csv
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Mar 30 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41.csv
[Fri Mar 30 11:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Mar 30 11:16:59 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Mar 30 15:38:42 2012] Source 46 is offset by 4.913922 and -3.045560 pixels which is larger than
2 X fitted extent = 1.717301 x 1.717301, not incorporating fit results
[Fri Mar 30 15:38:42 2012] Spatial fit model total counts = 2256.500000, observed total counts = 2246.000000
[Fri Mar 30 15:38:42 2012] Offset between fit and detection position for source 46 = 6.275025 pixels
[Fri Mar 30 15:38:42 2012] 2246.850000 total counts/ 2115.750000 bgd. counts: snr = 2.850168
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 6.275025 pixels
  Position = (311.7, 250.6) = 21 26 58.48 -12 12 32.5
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 131.1 +/- 47.4
  Background counts = 2115.8
  Rate = 0.001 +/- 0.0005
[Fri Mar 30 15:38:42 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:42 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 15:38:42 2012] Source does appear to be extended
[Fri Mar 30 15:38:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:08:14 2012] XMMSAS src. selection expression = ellipse(27069.608000, 21749.434000, 974.922028, 974.922028, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing source region out to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46_src.reg
[Sat Mar 31 03:08:14 2012] Extracting stamp from image fullrun_mos1_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (256, 195) - (368, 307)
[Sat Mar 31 03:08:14 2012] XMMSAS bgd. selection expression = annulus(27069.608000, 21749.434000, 1624.870047, 3249.740094, X, Y) && !ellipse(26529.609600, 20092.369400, 444.564013, 444.564013, 0.000000, X, Y) && !ellipse(26217.766000, 18843.904000, 372.276811, 372.276811, 0.000000, X, Y) && !ellipse(22869.123800, 25032.058000, 1201.912035, 1201.912035, 0.000000, X, Y) && !ellipse(29339.816200, 21557.874000, 234.000807, 234.000807, 0.000000, X, Y) && !ellipse(23903.779000, 24652.590800, 1192.984034, 1192.984034, 0.000000, X, Y) && !ellipse(23881.287320, 23804.426000, 770.063222, 568.288816, 79.538000, X, Y) && !ellipse(24390.975647, 23824.995087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23390.894000, 24753.203200, 2385.968069, 2385.968069, 0.000000, X, Y) && !ellipse(25650.964935, 19459.315811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.180000, 23378.030000, 1201.064035, 1201.064035, 0.000000, X, Y) && !ellipse(25537.935028, 24000.187195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.609009, 18395.498672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.876000, 24603.429800, 1135.368033, 1135.368033, 0.000000, X, Y) && !ellipse(28027.792297, 18770.595901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.811066, 25588.675293, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46.gif
[Sat Mar 31 03:54:56 2012] Mean detx,y = (2217.00, -3691.31) 
[Sat Mar 31 03:54:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:55:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:55:41 2012] Setting source spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Mar 31 03:55:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Mar 31 13:55:38 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:38 2012] Error reading totcts from fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Mar 31 13:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:42 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src46.arf
[Sat Mar 31 13:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:42 2012] Updating source flux to 1.6e-14
[Sat Mar 31 13:55:52 2012] Flag b found in src. 46 procflags, skipping spectral fitting