[Thu Mar 29 20:45:20 2012] Detection parameters:
  Position = (289.8, 294.7) = 21 27 5.00 -12 9 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 25.7
  Background counts = 252.6
  Rate = 0.001 +/- 0.0003

[Thu Mar 29 20:45:23 2012] Off-axis axis estimate = 0.69'
[Thu Mar 29 23:41:33 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:41:33 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Thu Mar 29 23:41:33 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Thu Mar 29 23:41:33 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 6.77"
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52.csv
[Fri Mar 30 02:59:31 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Mar 30 02:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52.csv
[Fri Mar 30 02:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:59:33 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Mar 30 02:59:33 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Mar 30 02:59:33 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Mar 30 06:40:33 2012] Source 30 is offset by 5.977484 and -7.546606 pixels which is larger than
2 X fitted extent = 5.390575 x 5.390575, not incorporating fit results
[Fri Mar 30 06:40:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:40:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:40:33 2012] Assessing source extent using major
[Fri Mar 30 06:40:33 2012] Source does appear to be extended
[Fri Mar 30 06:40:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 08:56:54 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 08:56:54 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Fri Mar 30 08:56:54 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Fri Mar 30 08:56:54 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 6.77"
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src40.ximg exists
[Fri Mar 30 11:16:58 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Mar 30 11:16:58 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_src40 appears to have run properly
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Mar 30 11:16:59 2012] fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Mar 30 11:16:59 2012] Fit fullrun_mos1_xmm0604740101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri Mar 30 15:38:42 2012] Source 30 is offset by -6.476080 and 1.615601 pixels which is larger than
2 X fitted extent = 1.840170 x 1.840170, not incorporating fit results
[Fri Mar 30 15:38:42 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 15:38:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 15:38:42 2012] Assessing source extent using major
[Fri Mar 30 15:38:42 2012] Source does appear to be extended
[Fri Mar 30 15:38:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:08:14 2012] XMMSAS src. selection expression = ellipse(25159.811066, 25588.675293, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing source region out to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30_src.reg
[Sat Mar 31 03:08:14 2012] Extracting stamp from image fullrun_mos1_xmm0604740101_pi300-10000_cl_sm2.00.img.gz, (252, 257) - (327, 332)
[Sat Mar 31 03:08:14 2012] XMMSAS bgd. selection expression = annulus(25159.811066, 25588.675293, 1087.500000, 2175.000000, X, Y) && !ellipse(22869.123800, 25032.058000, 1201.912035, 1201.912035, 0.000000, X, Y) && !ellipse(23903.779000, 24652.590800, 1192.984034, 1192.984034, 0.000000, X, Y) && !ellipse(23881.287320, 23804.426000, 770.063222, 568.288816, 79.538000, X, Y) && !ellipse(24390.975647, 23824.995087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23390.894000, 24753.203200, 2385.968069, 2385.968069, 0.000000, X, Y) && !ellipse(24694.180000, 23378.030000, 1201.064035, 1201.064035, 0.000000, X, Y) && !ellipse(25537.935028, 24000.187195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.876000, 24603.429800, 1135.368033, 1135.368033, 0.000000, X, Y)
[Sat Mar 31 03:08:14 2012] Writing fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30.gif
[Sat Mar 31 03:54:19 2012] Mean detx,y = (-836.81, -766.03) 
[Sat Mar 31 03:54:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:54:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:54:41 2012] Setting source spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Mar 31 03:54:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Mar 31 08:57:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 08:57:31 2012] rmf not generated due to insufficient counts
[Sat Mar 31 13:55:38 2012] Updating aperture counts using extracted products
[Sat Mar 31 13:55:38 2012] Error reading totcts from fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Mar 31 13:55:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 13:55:41 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos1_xmm0604740101_pi300-10000_pass1_cl_src30.arf
[Sat Mar 31 13:55:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 13:55:42 2012] Updating source flux to 1.3e-14
[Sat Mar 31 13:55:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting