[Thu Feb 23 16:52:59 2012] Detection parameters:
  Position = (281.0, 322.5) = 4 26 0.55 -57 12 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149365.7 +/- 458.0
  Background counts = 29.5
  Rate = 3 +/- 0.009

[Thu Feb 23 16:53:00 2012] Off-axis axis estimate = 2.16'
[Thu Feb 23 18:25:27 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 18:25:27 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Feb 23 18:25:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.606
[Thu Feb 23 18:25:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.51"
[Thu Feb 23 19:56:15 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 19:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 19:56:15 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 19:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 19:56:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 19:56:16 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 19:56:16 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 19:56:16 2012] Fit fullrun_mos2_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 19:56:35 2012] Spatial fit model total counts = 128356.000000, observed total counts = 128693.000000
[Thu Feb 23 19:56:35 2012] Offset between fit and detection position for source 4 = 0.308189 pixels
[Thu Feb 23 19:56:35 2012] 126773.300000 total counts/ 13535.300000 bgd. counts: snr = 973.325827
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.308189 pixels
  Position = (280.8, 322.8) = 4 26 0.63 -57 12 3.7
  Extent = 5.1 (5.0-5.1)", rotation angle = 0
  Source counts = 113238.0 +/- 356.1
  Background counts = 13535.3
  Rate = 2 +/- 0.006
[Thu Feb 23 19:56:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 19:56:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 19:56:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 19:56:35 2012] Source does appear to be extended
[Thu Feb 23 19:56:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 20:38:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 20:38:59 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Thu Feb 23 20:38:59 2012] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.723
[Thu Feb 23 20:38:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.06"
[Thu Feb 23 22:01:41 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 22:01:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 22:01:41 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 22:01:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 22:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:01:41 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 22:01:41 2012] fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 22:01:41 2012] Fit fullrun_mos2_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 22:01:54 2012] Spatial fit model total counts = 127216.000000, observed total counts = 127769.000000
[Thu Feb 23 22:01:54 2012] Offset between fit and detection position for source 4 = 0.003643 pixels
[Thu Feb 23 22:01:54 2012] 125825.000000 total counts/ 13223.000000 bgd. counts: snr = 979.221872
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.003643 pixels
  Position = (280.8, 322.8) = 4 26 0.63 -57 12 3.7
  Extent = 5.0 (5.0-5.0)", rotation angle = 0
  Source counts = 112602.0 +/- 354.7
  Background counts = 13223.0
  Rate = 2 +/- 0.006
[Thu Feb 23 22:01:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 22:01:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 22:01:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 22:01:54 2012] Source does appear to be extended
[Thu Feb 23 22:01:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 00:07:59 2012] Counts = 112602.000000, rescaling region sizes by 3.000000
[Fri Feb 24 00:07:59 2012] XMMSAS src. selection expression = ellipse(24385.088300, 28036.794600, 902.019626, 902.019626, 0.000000, X, Y)
[Fri Feb 24 00:07:59 2012] Writing source region out to fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_src.reg
[Fri Feb 24 00:07:59 2012] Extracting stamp from image fullrun_mos2_xmm0604720401_pi300-10000_cl_sm2.00.img.gz, (229, 271) - (333, 375)
[Fri Feb 24 00:07:59 2012] XMMSAS bgd. selection expression = annulus(24385.088300, 28036.794600, 4510.098130, 9020.196260, X, Y) && !ellipse(24320.197876, 27374.078949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26579.210968, 36482.366699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32192.707600, 31899.033600, 510.292815, 388.354411, 76.095982, X, Y) && !ellipse(29830.154800, 36284.447400, 304.747209, 304.747209, 0.000000, X, Y) && !ellipse(15409.600952, 28829.953644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32118.595062, 37689.956329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33586.235000, 34839.717800, 588.080017, 588.080017, 0.000000, X, Y) && !ellipse(23767.404846, 35437.639221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15519.288177, 34748.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14901.979263, 18753.830719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17531.071579, 36586.204895, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 00:07:59 2012] Writing fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4.gif
[Fri Feb 24 00:08:14 2012] Mean detx,y = (-849.83, -27.69) 
[Fri Feb 24 00:08:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 00:11:05 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 00:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 00:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Feb 24 00:50:48 2012] Updating aperture counts using extracted products
[Fri Feb 24 00:50:48 2012] Error reading totcts from fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 00:50:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 00:50:49 2012] Using photon index=1.80, rate=1.86, arf fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4.arf
[Fri Feb 24 00:50:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 00:50:49 2012] Updating source flux to 2.1e-11
[Fri Feb 24 00:53:11 2012] Reading fit data from xmm0604720401/analysis//spectral/fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_pl.csv
[Fri Feb 24 00:53:11 2012] Spectral fit parameter nH value = 505875000000.0
[Fri Feb 24 00:53:11 2012] Spectral fit parameter PhoIndex value = 2.06198
[Fri Feb 24 00:53:11 2012] Failed to get F(0.3-8.0) from xmm0604720401/analysis//spectral/fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 00:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 00:53:11 2012] Using Nh = 5.1e+11, photon index=2.06, rate=1.86, arf fullrun_mos2_xmm0604720401_pi300-10000_pass1_cl_src4.arf
[Fri Feb 24 00:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 00:53:11 2012] Updating source flux to 1.9e-11