[Thu Feb 23 16:52:32 2012] Detection parameters:
  Position = (281.0, 322.9) = 4 26 0.55 -57 12 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164645.4 +/- 469.7
  Background counts = 33.0
  Rate = 3 +/- 0.008

[Thu Feb 23 16:52:33 2012] Off-axis axis estimate = 2.18'
[Thu Feb 23 17:23:03 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 17:23:03 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Feb 23 17:23:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Thu Feb 23 17:23:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.52"
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 18:25:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 18:25:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 18:25:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 18:25:27 2012] Fit fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 19:56:26 2012] Spatial fit model total counts = 145711.000000, observed total counts = 145711.000000
[Thu Feb 23 19:56:26 2012] Offset between fit and detection position for source 3 = 0.187199 pixels
[Thu Feb 23 19:56:26 2012] 144338.800000 total counts/ 21245.800000 bgd. counts: snr = 844.494474
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.187199 pixels
  Position = (280.8, 322.8) = 4 26 0.64 -57 12 3.6
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 123093.0 +/- 379.9
  Background counts = 21245.8
  Rate = 2 +/- 0.006
[Thu Feb 23 19:56:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 19:56:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 19:56:26 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 19:56:26 2012] Source does appear to be extended
[Thu Feb 23 19:56:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 20:08:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 20:08:28 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Thu Feb 23 20:08:28 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.236
[Thu Feb 23 20:08:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.65"
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 20:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 20:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 20:38:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 20:38:58 2012] Fit fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 22:01:48 2012] Spatial fit model total counts = 144601.000000, observed total counts = 144790.000000
[Thu Feb 23 22:01:48 2012] Offset between fit and detection position for source 3 = 0.006418 pixels
[Thu Feb 23 22:01:48 2012] 142850.500000 total counts/ 21027.500000 bgd. counts: snr = 840.108675
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006418 pixels
  Position = (280.8, 322.8) = 4 26 0.64 -57 12 3.6
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 121823.0 +/- 378.0
  Background counts = 21027.5
  Rate = 2 +/- 0.006
[Thu Feb 23 22:01:48 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 22:01:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 22:01:48 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 22:01:48 2012] Source does appear to be extended
[Thu Feb 23 22:01:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 23:28:25 2012] Counts = 121823.000000, rescaling region sizes by 3.000000
[Thu Feb 23 23:28:25 2012] XMMSAS src. selection expression = ellipse(24382.549180, 28039.294600, 1002.590512, 1002.590512, 0.000000, X, Y)
[Thu Feb 23 23:28:25 2012] Writing source region out to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_src.reg
[Thu Feb 23 23:28:25 2012] Extracting stamp from image fullrun_mos1_xmm0604720401_pi300-10000_cl_sm2.00.img.gz, (223, 265) - (338, 380)
[Thu Feb 23 23:28:25 2012] XMMSAS bgd. selection expression = annulus(24382.549180, 28039.294600, 5012.952562, 10025.905125, X, Y) && !ellipse(26566.759060, 36477.603000, 515.030415, 515.030415, 0.000000, X, Y) && !ellipse(29855.097626, 36306.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15559.092377, 34838.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15437.660629, 28865.180573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17485.658630, 36586.104004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29741.626984, 34194.158905, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 23:28:25 2012] Writing fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3.gif
[Thu Feb 23 23:28:49 2012] Mean detx,y = (183.91, 679.44) 
[Thu Feb 23 23:28:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 23:31:40 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 23:31:40 2012] Setting source spectrum file to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 23:31:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Feb 24 00:50:47 2012] Updating aperture counts using extracted products
[Fri Feb 24 00:50:47 2012] Error reading totcts from fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 24 00:50:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 00:50:48 2012] Using photon index=1.80, rate=2.01, arf fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3.arf
[Fri Feb 24 00:50:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 00:50:48 2012] Updating source flux to 1.9e-11
[Fri Feb 24 00:52:20 2012] Reading fit data from xmm0604720401/analysis//spectral/fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_pl.csv
[Fri Feb 24 00:52:20 2012] Spectral fit parameter nH value = 2.5515e+12
[Fri Feb 24 00:52:20 2012] Spectral fit parameter PhoIndex value = 2.08806
[Fri Feb 24 00:52:20 2012] Failed to get F(0.3-8.0) from xmm0604720401/analysis//spectral/fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 00:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 00:52:20 2012] Using Nh = 2.6e+12, photon index=2.09, rate=2.01, arf fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src3.arf
[Fri Feb 24 00:52:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 00:52:20 2012] Updating source flux to 1.7e-11