[Thu Feb 23 16:52:33 2012] Detection parameters:
  Position = (226.4, 132.0) = 4 26 30.03 -57 25 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.7 +/- 18.5
  Background counts = 19.5
  Rate = 0.003 +/- 0.0003

[Thu Feb 23 16:52:33 2012] Off-axis axis estimate = 13.15'
[Thu Feb 23 17:23:03 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 17:23:03 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Thu Feb 23 17:23:03 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.862
[Thu Feb 23 17:23:03 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.00"
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10.ximg exists
[Thu Feb 23 18:25:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10.csv
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Feb 23 18:25:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10.csv
[Thu Feb 23 18:25:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Feb 23 18:25:27 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Feb 23 18:25:27 2012] Fit fullrun_mos1_xmm0604720401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Feb 23 19:56:26 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.487798 pixels away
[Thu Feb 23 19:56:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 19:56:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 19:56:26 2012] Assessing source extent using major
[Thu Feb 23 19:56:26 2012] Source does appear to be extended
[Thu Feb 23 19:56:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 20:08:28 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 20:08:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 20:08:28 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Thu Feb 23 20:08:28 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.862
[Thu Feb 23 20:08:28 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.00"
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src10.ximg exists
[Thu Feb 23 20:38:58 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Feb 23 20:38:58 2012] Fit fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu Feb 23 20:38:59 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Feb 23 20:38:59 2012] fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Feb 23 20:38:59 2012] Fit fullrun_mos1_xmm0604720401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Feb 23 22:01:48 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.491876 pixels away
[Thu Feb 23 22:01:48 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 22:01:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 22:01:48 2012] Assessing source extent using major
[Thu Feb 23 22:01:48 2012] Source does appear to be extended
[Thu Feb 23 22:01:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 23:28:25 2012] XMMSAS src. selection expression = ellipse(19646.252441, 11434.724731, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 23 23:28:25 2012] Writing source region out to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19_src.reg
[Thu Feb 23 23:28:25 2012] Extracting stamp from image fullrun_mos1_xmm0604720401_pi300-10000_cl_sm2.00.img.gz, (189, 94) - (264, 169)
[Thu Feb 23 23:28:25 2012] XMMSAS bgd. selection expression = annulus(19646.252441, 11434.724731, 1087.500000, 2175.000000, X, Y)
[Thu Feb 23 23:28:25 2012] Writing fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19.gif
[Thu Feb 23 23:34:52 2012] Mean detx,y = (4451.34, -16017.48) 
[Thu Feb 23 23:34:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 23:35:22 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 23:35:23 2012] Setting source spectrum file to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Feb 23 23:35:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Feb 24 00:07:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 24 00:07:33 2012] rmf not generated due to insufficient counts
[Fri Feb 24 00:50:47 2012] Updating aperture counts using extracted products
[Fri Feb 24 00:50:48 2012] Error reading totcts from fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Feb 24 00:50:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 00:50:48 2012] Using photon index=1.80, rate=0.00335, arf fullrun_mos1_xmm0604720401_pi300-10000_pass1_cl_src19.arf
[Fri Feb 24 00:50:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 00:50:48 2012] Updating source flux to 1.1e-13
[Fri Feb 24 00:50:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting