[Thu Nov 24 03:19:37 2011] Detection parameters:
  Position = (117.5, 273.8) = 4 27 28.51 -57 14 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1629.0 +/- 51.8
  Background counts = 122.9
  Rate = 0.02 +/- 0.0005

[Thu Nov 24 03:19:38 2011] Off-axis axis estimate = 13.24'
[Thu Nov 24 05:21:42 2011] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:21:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 05:21:42 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Thu Nov 24 05:21:42 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.000
[Thu Nov 24 05:21:42 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 13.05"
[Thu Nov 24 05:45:20 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Nov 24 05:45:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 05:45:20 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Nov 24 05:45:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 05:45:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:45:20 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Nov 24 05:45:20 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Nov 24 05:45:20 2011] Fit fullrun_mos1_xmm0604720301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Nov 24 05:46:12 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.537072 pixels away
[Thu Nov 24 05:46:12 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 05:46:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 05:46:12 2011] Assessing source extent using major
[Thu Nov 24 05:46:12 2011] Source does appear to be extended
[Thu Nov 24 05:46:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 17:49:51 2011] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 17:49:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 17:49:51 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Thu Nov 24 17:49:51 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.000
[Thu Nov 24 17:49:51 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 13.05"
[Thu Nov 24 18:07:25 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Nov 24 18:07:25 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Nov 24 18:07:25 2011] Fit fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Nov 24 18:07:25 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Nov 24 18:07:25 2011] fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Nov 24 18:07:25 2011] Fit fullrun_mos1_xmm0604720301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Nov 24 18:08:37 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.762422 pixels away
[Thu Nov 24 18:08:37 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 18:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 18:08:37 2011] Assessing source extent using major
[Thu Nov 24 18:08:37 2011] Source does appear to be extended
[Thu Nov 24 18:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 04:56:07 2011] Counts = 1629.036011, rescaling region sizes by 2.000000
[Fri Nov 25 04:56:07 2011] XMMSAS src. selection expression = ellipse(10170.302208, 23775.898285, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Nov 25 04:56:07 2011] Writing source region out to fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 04:56:07 2011] Extracting stamp from image fullrun_mos1_xmm0604720301_pi300-10000_cl_sm2.00.img.gz, (42, 199) - (192, 349)
[Fri Nov 25 04:56:07 2011] XMMSAS bgd. selection expression = annulus(10170.302208, 23775.898285, 4350.000000, 8700.000000, X, Y) && !ellipse(13071.680389, 18115.636017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15463.547165, 27978.820282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12969.740540, 21261.722275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14986.014923, 17874.475723, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 04:56:07 2011] Writing fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 05:00:53 2011] Mean detx,y = (14268.48, -3977.45) 
[Fri Nov 25 05:00:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 05:02:47 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 05:02:47 2011] Setting source spectrum file to fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 05:02:47 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 05:36:55 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 05:36:55 2011] rmf not generated due to insufficient counts
[Fri Nov 25 05:59:34 2011] Updating aperture counts using extracted products
[Fri Nov 25 05:59:34 2011] Error reading totcts from fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 05:59:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 05:59:35 2011] Using photon index=1.80, rate=0.016, arf fullrun_mos1_xmm0604720301_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 05:59:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 05:59:35 2011] Updating source flux to 3.5e-13
[Fri Nov 25 05:59:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting