[Sat Aug 18 17:10:46 2012] Detection parameters:
  Position = (279.6, 301.0) = 10 18 55.45 -58 56 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1000.4 +/- 38.2
  Background counts = 16.9
  Rate = 0.05 +/- 0.002

[Sat Aug 18 17:10:46 2012] Off-axis axis estimate = 1.38'
[Sat Aug 18 17:55:18 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 17:55:18 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sat Aug 18 17:55:18 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sat Aug 18 17:55:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.12"
[Sat Aug 18 18:10:57 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 18 18:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 18:10:57 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 18 18:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 18:10:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 18:10:58 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 18 18:10:58 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 18 18:10:58 2012] Fit fullrun_mos2_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 18 18:11:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.226130 pixels away
[Sat Aug 18 18:11:06 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 18:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 18:11:06 2012] Assessing source extent using major
[Sat Aug 18 18:11:06 2012] Source does appear to be extended
[Sat Aug 18 18:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 18:43:32 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 18:43:32 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sat Aug 18 18:43:32 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sat Aug 18 18:43:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.12"
[Sat Aug 18 19:02:20 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 18 19:02:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 19:02:20 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 18 19:02:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 19:02:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 19:02:20 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 18 19:02:20 2012] fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 18 19:02:20 2012] Fit fullrun_mos2_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 18 19:02:27 2012] Spatial fit model total counts = 1016.230000, observed total counts = 1021.000000
[Sat Aug 18 19:02:27 2012] Offset between fit and detection position for source 1 = 0.050069 pixels
[Sat Aug 18 19:02:27 2012] 1014.173000 total counts/ 336.547000 bgd. counts: snr = 36.937475
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050069 pixels
  Position = (279.6, 301.0) = 10 18 55.48 -58 56 46.7
  Extent = 5.1 (4.8-5.5)", rotation angle = 0
  Source counts = 677.6 +/- 31.8
  Background counts = 336.5
  Rate = 0.03 +/- 0.002
[Sat Aug 18 19:02:27 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:02:27 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 19:02:27 2012] Source does appear to be extended
[Sat Aug 18 19:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:24:04 2012] XMMSAS src. selection expression = ellipse(24273.386400, 26142.005000, 307.497609, 307.497609, 0.000000, X, Y)
[Sat Aug 18 19:24:04 2012] Writing source region out to fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 18 19:24:04 2012] Extracting stamp from image fullrun_mos2_xmm0604700101_pi300-10000_cl_sm2.00.img.gz, (262, 283) - (297, 319)
[Sat Aug 18 19:24:04 2012] XMMSAS bgd. selection expression = annulus(24273.386400, 26142.005000, 512.496015, 1024.992029, X, Y)
[Sat Aug 18 19:24:04 2012] Writing fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1.gif
[Sat Aug 18 19:24:06 2012] Mean detx,y = (1058.75, 26.42) 
[Sat Aug 18 19:24:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 19:24:13 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 19:24:13 2012] Setting source spectrum file to fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 19:24:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 18 19:40:36 2012] Updating aperture counts using extracted products
[Sat Aug 18 19:40:37 2012] Error reading totcts from fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 19:40:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 19:40:37 2012] Using photon index=1.80, rate=0.0327, arf fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 19:40:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 19:40:37 2012] Updating source flux to 4.4e-13
[Sat Aug 18 19:41:08 2012] Reading fit data from xmm0604700101/analysis//spectral/fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 18 19:41:08 2012] Spectral fit parameter nH value = 8.39556e+21
[Sat Aug 18 19:41:08 2012] Spectral fit parameter PhoIndex value = 1.7924
[Sat Aug 18 19:41:08 2012] Failed to get F(0.3-8.0) from xmm0604700101/analysis//spectral/fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 19:41:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 19:41:08 2012] Using Nh = 8.4e+21, photon index=1.79, rate=0.0327, arf fullrun_mos2_xmm0604700101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 19:41:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 19:41:08 2012] Updating source flux to 6.8e-13