[Sat Aug 18 17:10:33 2012] Detection parameters:
  Position = (249.0, 409.5) = 10 19 12.55 -58 48 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 9.4
  Background counts = 16.0
  Rate = 0.003 +/- 0.0007

[Sat Aug 18 17:10:33 2012] Off-axis axis estimate = 8.81'
[Sat Aug 18 17:41:54 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 17:41:54 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Aug 18 17:41:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.950
[Sat Aug 18 17:41:54 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.84"
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 18 17:55:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Aug 18 17:55:18 2012] Fit fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Aug 18 18:11:04 2012] Source 6 is offset by -7.527932 and -0.105985 pixels which is larger than
2 X fitted extent = 3.590129 x 3.590129, not incorporating fit results
[Sat Aug 18 18:11:04 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.431458 pixels away
[Sat Aug 18 18:11:04 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 18:11:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 18:11:04 2012] Assessing source extent using major
[Sat Aug 18 18:11:04 2012] Source does appear to be extended
[Sat Aug 18 18:11:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 18:30:24 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 18:30:24 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Aug 18 18:30:24 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.950
[Sat Aug 18 18:30:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.84"
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Aug 18 18:43:32 2012] Fit fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src7 appears to have run properly
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Aug 18 18:43:32 2012] Fit fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Aug 18 19:02:25 2012] Source 6 is offset by -1.480501 and -3.401055 pixels which is larger than
2 X fitted extent = 0.540311 x 0.484770, not incorporating fit results
[Sat Aug 18 19:02:25 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:02:25 2012] Assessing source extent using major
[Sat Aug 18 19:02:25 2012] Source does appear to be extended
[Sat Aug 18 19:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:18:16 2012] XMMSAS src. selection expression = ellipse(21615.281906, 35579.375305, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 18 19:18:16 2012] Writing source region out to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6_src.reg
[Sat Aug 18 19:18:16 2012] Extracting stamp from image fullrun_mos1_xmm0604700101_pi300-10000_cl_sm2.00.img.gz, (212, 372) - (287, 447)
[Sat Aug 18 19:18:16 2012] XMMSAS bgd. selection expression = annulus(21615.281906, 35579.375305, 1087.500000, 2175.000000, X, Y) && !ellipse(20177.633987, 34967.566284, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 19:18:16 2012] Writing fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6.gif
[Sat Aug 18 19:19:17 2012] Mean detx,y = (3392.18, 8074.89) 
[Sat Aug 18 19:19:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 19:19:38 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 19:19:38 2012] Setting source spectrum file to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug 18 19:19:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Aug 18 19:23:51 2012] Not generating rmf since there are only 37 counts
[Sat Aug 18 19:23:51 2012] rmf not generated due to insufficient counts
[Sat Aug 18 19:40:36 2012] Updating aperture counts using extracted products
[Sat Aug 18 19:40:36 2012] Error reading totcts from fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug 18 19:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 19:40:36 2012] Using photon index=1.80, rate=0.00263, arf fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src6.arf
[Sat Aug 18 19:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 19:40:36 2012] Updating source flux to 3.7e-14
[Sat Aug 18 19:40:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting