[Sat Aug 18 17:10:33 2012] Detection parameters:
  Position = (279.5, 301.1) = 10 18 55.49 -58 56 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 882.8 +/- 36.3
  Background counts = 13.2
  Rate = 0.05 +/- 0.002

[Sat Aug 18 17:10:33 2012] Off-axis axis estimate = 1.38'
[Sat Aug 18 17:41:54 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 17:41:54 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sat Aug 18 17:41:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.657
[Sat Aug 18 17:41:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.12"
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 17:55:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 18 17:55:18 2012] Fit fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 18 18:11:04 2012] Spatial fit model total counts = 871.399000, observed total counts = 949.000000
[Sat Aug 18 18:11:04 2012] Offset between fit and detection position for source 2 = 0.332817 pixels
[Sat Aug 18 18:11:04 2012] 874.472000 total counts/ 384.791000 bgd. counts: snr = 24.963231
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.332817 pixels
  Position = (279.9, 301.1) = 10 18 55.31 -58 56 46.5
  Extent = 4.2 (3.9-4.7)", rotation angle = 0
  Source counts = 489.7 +/- 29.6
  Background counts = 384.8
  Rate = 0.02 +/- 0.001
[Sat Aug 18 18:11:04 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 18:11:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 18:11:04 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 18:11:04 2012] Source does appear to be extended
[Sat Aug 18 18:11:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 18:30:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 18:30:24 2012] Initial guess for spatial extent in simple fitting = 4.24"
[Sat Aug 18 18:30:24 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.690
[Sat Aug 18 18:30:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.24"
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 18 18:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 18 18:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 18:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 18 18:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 18 18:43:32 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 18 18:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 18 18:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604700101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 19:02:25 2012] Spatial fit model total counts = 210.499000, observed total counts = 949.000000
[Sat Aug 18 19:02:25 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 18 19:02:25 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:02:25 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 19:02:25 2012] Source does appear to be extended
[Sat Aug 18 19:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:18:16 2012] XMMSAS src. selection expression = ellipse(24300.333800, 26147.217600, 254.359807, 254.359807, 0.000000, X, Y)
[Sat Aug 18 19:18:16 2012] Writing source region out to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug 18 19:18:16 2012] Extracting stamp from image fullrun_mos1_xmm0604700101_pi300-10000_cl_sm2.00.img.gz, (265, 286) - (294, 316)
[Sat Aug 18 19:18:16 2012] XMMSAS bgd. selection expression = annulus(24300.333800, 26147.217600, 423.933012, 847.866024, X, Y)
[Sat Aug 18 19:18:16 2012] Writing fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2.gif
[Sat Aug 18 19:18:18 2012] Mean detx,y = (226.41, -1221.17) 
[Sat Aug 18 19:18:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 19:18:26 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 19:18:26 2012] Setting source spectrum file to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 18 19:18:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug 18 19:40:36 2012] Updating aperture counts using extracted products
[Sat Aug 18 19:40:36 2012] Error reading totcts from fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 18 19:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 19:40:36 2012] Using photon index=1.80, rate=0.0236, arf fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2.arf
[Sat Aug 18 19:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 19:40:36 2012] Updating source flux to 3.4e-13
[Sat Aug 18 19:40:38 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Sat Aug 18 19:40:45 2012] Reading fit data from xmm0604700101/analysis//spectral/fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug 18 19:40:45 2012] Spectral fit parameter nH value = 8.03484e+21
[Sat Aug 18 19:40:45 2012] Spectral fit parameter PhoIndex value = 1.72384
[Sat Aug 18 19:40:45 2012] Failed to get F(0.3-8.0) from xmm0604700101/analysis//spectral/fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 19:40:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 19:40:45 2012] Using Nh = 8e+21, photon index=1.72, rate=0.0236, arf fullrun_mos1_xmm0604700101_pi300-10000_pass1_cl_src2.arf
[Sat Aug 18 19:40:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 19:40:45 2012] Updating source flux to 5.2e-13