[Sat Aug 18 17:10:33 2012] Detection parameters:
  Position = (217.7, 419.0) = 10 19 30.06 -58 48 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.9 +/- 10.6
  Background counts = 13.8
  Rate = 0.005 +/- 0.0009

[Sat Aug 18 17:10:33 2012] Off-axis axis estimate = 10.52'
[Sat Aug 18 17:41:54 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 17:41:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 17:41:54 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Sat Aug 18 17:41:54 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Sat Aug 18 17:41:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.69"
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 18 17:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 18 17:55:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 18 17:55:18 2012] fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 18 17:55:18 2012] Fit fullrun_mos1_xmm0604700101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 18 18:11:04 2012] Spatial fit model total counts = 250.742000, observed total counts = 251.000000
[Sat Aug 18 18:11:04 2012] Offset between fit and detection position for source 10 = 0.181556 pixels
[Sat Aug 18 18:11:04 2012] 248.502300 total counts/ 223.003000 bgd. counts: snr = 1.707548
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.181556 pixels
  Position = (217.7, 419.2) = 10 19 30.04 -58 48 12.2
  Extent = 3.0 (2.9-4.8)", rotation angle = 0
  Source counts = 25.5 +/- 15.8
  Background counts = 223.0
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability