[Fri May 25 20:34:18 2012] Detection parameters:
  Position = (149.5, 286.0) = 9 16 5.86 44 3 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 890.3 +/- 40.3
  Background counts = 140.9
  Rate = 0.05 +/- 0.002

[Fri May 25 20:34:18 2012] Off-axis axis estimate = 10.84'
[Fri May 25 21:02:37 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Fri May 25 21:02:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 21:02:37 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Fri May 25 21:02:37 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Fri May 25 21:02:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.85"
[Fri May 25 21:09:39 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 21:09:39 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 21:09:39 2012] Fit fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 25 21:09:39 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 21:09:39 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 21:09:39 2012] Fit fullrun_mos1_xmm0604680201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 21:40:31 2012] Spatial fit model total counts = 811.373000, observed total counts = 811.000000
[Fri May 25 21:40:31 2012] Offset between fit and detection position for source 2 = 0.055481 pixels
[Fri May 25 21:40:31 2012] 814.622000 total counts/ 376.422000 bgd. counts: snr = 22.585769
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.055481 pixels
  Position = (149.5, 286.0) = 9 16 5.84 44 3 43.5
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 438.2 +/- 28.5
  Background counts = 376.4
  Rate = 0.02 +/- 0.001
[Fri May 25 21:40:31 2012] Vigneting correction estimate = 1.000000
[Fri May 25 21:40:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 21:40:31 2012] Assessing source extent using major axis lower bound
[Fri May 25 21:40:31 2012] Source does appear to be extended
[Fri May 25 21:40:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 22:05:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 22:05:25 2012] Initial guess for spatial extent in simple fitting = 6.27"
[Fri May 25 22:05:25 2012] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.795
[Fri May 25 22:05:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.27"
[Fri May 25 22:11:18 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 22:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1.csv
[Fri May 25 22:11:19 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 22:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1.csv
[Fri May 25 22:11:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 22:11:19 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 22:11:19 2012] fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 22:11:19 2012] Fit fullrun_mos1_xmm0604680201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 22:34:57 2012] Spatial fit model total counts = 668.998000, observed total counts = 669.000000
[Fri May 25 22:34:57 2012] Offset between fit and detection position for source 2 = 0.007840 pixels
[Fri May 25 22:34:57 2012] 673.282000 total counts/ 255.313000 bgd. counts: snr = 26.158185
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007840 pixels
  Position = (149.5, 286.0) = 9 16 5.84 44 3 43.5
  Extent = 5.9 (5.4-6.5)", rotation angle = 0
  Source counts = 418.0 +/- 25.9
  Background counts = 255.3
  Rate = 0.02 +/- 0.001
[Fri May 25 22:34:57 2012] Vigneting correction estimate = 1.000000
[Fri May 25 22:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 22:34:57 2012] Assessing source extent using major axis lower bound
[Fri May 25 22:34:57 2012] Source does appear to be extended
[Fri May 25 22:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 22:53:44 2012] XMMSAS src. selection expression = ellipse(12959.496600, 24837.429600, 352.903810, 352.903810, 0.000000, X, Y)
[Fri May 25 22:53:44 2012] Writing source region out to fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_src.reg
[Fri May 25 22:53:44 2012] Extracting stamp from image fullrun_mos1_xmm0604680201_pi300-10000_cl_sm2.00.img.gz, (129, 266) - (170, 306)
[Fri May 25 22:53:44 2012] XMMSAS bgd. selection expression = annulus(12959.496600, 24837.429600, 588.173017, 1176.346034, X, Y) && !ellipse(14220.091696, 26061.094600, 438.071213, 438.071213, 0.000000, X, Y)
[Fri May 25 22:53:44 2012] Writing fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2.gif
[Fri May 25 22:53:47 2012] Mean detx,y = (-5027.27, 11119.84) 
[Fri May 25 22:53:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 22:53:54 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 22:53:54 2012] Setting source spectrum file to fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 22:53:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 25 23:13:12 2012] Updating aperture counts using extracted products
[Fri May 25 23:13:12 2012] Error reading totcts from fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 23:13:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 23:13:12 2012] Using photon index=1.80, rate=0.0206, arf fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2.arf
[Fri May 25 23:13:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 23:13:12 2012] Updating source flux to 4.5e-13
[Fri May 25 23:13:23 2012] Reading fit data from xmm0604680201/analysis//spectral/fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_pl.csv
[Fri May 25 23:13:23 2012] Spectral fit parameter nH value = 1.19372e+20
[Fri May 25 23:13:23 2012] Spectral fit parameter PhoIndex value = 2.28267
[Fri May 25 23:13:23 2012] Failed to get F(0.3-8.0) from xmm0604680201/analysis//spectral/fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri May 25 23:13:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 23:13:23 2012] Using Nh = 1.2e+20, photon index=2.28, rate=0.0206, arf fullrun_mos1_xmm0604680201_pi300-10000_pass1_cl_src2.arf
[Fri May 25 23:13:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 23:13:23 2012] Updating source flux to 3.8e-13