[Wed May 30 09:21:34 2012] Detection parameters:
  Position = (275.2, 292.9) = 5 40 52.14 -66 39 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.8 +/- 31.1
  Background counts = 50.8
  Rate = 0.008 +/- 0.0007

[Wed May 30 09:21:35 2012] Off-axis axis estimate = 1.73'
[Wed May 30 09:43:39 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 30 09:43:39 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 30 09:43:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed May 30 09:43:39 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.29"
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 30 12:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6.csv
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 30 12:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6.csv
[Wed May 30 12:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 30 12:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:14 2012] Spatial fit model total counts = 5343.020000, observed total counts = 4812.000000
[Wed May 30 12:16:14 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 12:16:14 2012] Spatial fit model total counts = 1258.710000, observed total counts = 1258.000000
[Wed May 30 12:16:14 2012] Offset between fit and detection position for source 6 = 4.775371 pixels
[Wed May 30 12:16:14 2012] Warning, changing simple spatial fit ID from 6 to 13
[Wed May 30 12:16:14 2012] 1236.153000 total counts/ 928.579000 bgd. counts: snr = 10.093463
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.775371 pixels
  Position = (272.2, 296.6) = 5 40 54.37 -66 38 57.1
  Extent = 8.6 (7.1-10.7)", rotation angle = 0
  Source counts = 307.6 +/- 35.2
  Background counts = 928.6
  Rate = 0.006 +/- 0.0007
[Wed May 30 12:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 30 12:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 12:16:14 2012] Assessing source extent using major axis lower bound
[Wed May 30 12:16:14 2012] Source does appear to be extended
[Wed May 30 12:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 12:16:14 2012] Source is confused with source 13
[Wed May 30 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 20:30:29 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Wed May 30 20:30:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Wed May 30 20:30:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.61"
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6.csv
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6.csv
[Thu May 31 00:02:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 31 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:27 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Thu May 31 00:02:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:02:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:02:27 2012] Source does appear to be extended
[Thu May 31 00:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:32:54 2012] XMMSAS src. selection expression = ellipse(23628.648000, 25751.520000, 516.530415, 516.530415, 0.000000, X, Y)
[Thu May 31 01:32:54 2012] Writing source region out to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6_src.reg
[Thu May 31 01:32:54 2012] Extracting stamp from image fullrun_mos2_xmm0604590401_pi300-10000_cl_sm2.00.img.gz, (242, 267) - (302, 326)
[Thu May 31 01:32:54 2012] XMMSAS bgd. selection expression = annulus(23628.648000, 25751.520000, 860.884025, 1721.768050, X, Y) && !ellipse(24551.460000, 24372.344000, 995.664029, 995.664029, 0.000000, X, Y) && !ellipse(23988.311249, 24827.109344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.335175, 24380.565277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23686.331600, 23590.862000, 1377.416040, 1377.416040, 0.000000, X, Y) && !ellipse(23910.479065, 23971.789001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23227.684000, 26336.354000, 1243.352036, 319.314409, 226.697000, X, Y) && !ellipse(22753.936000, 26908.222000, 1561.920045, 1561.920045, 0.000000, X, Y) && !ellipse(22451.388000, 25698.437200, 1278.472037, 1278.472037, 0.000000, X, Y)
[Thu May 31 01:32:54 2012] Writing fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6.gif
[Thu May 31 01:41:45 2012] Mean detx,y = (-1073.75, -1594.06) 
[Thu May 31 01:41:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:41:52 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:41:52 2012] Setting source spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 01:41:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 31 02:54:49 2012] Updating aperture counts using extracted products
[Thu May 31 02:54:49 2012] Error reading totcts from fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 02:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:54:49 2012] Using photon index=1.80, rate=0.00623, arf fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src6.arf
[Thu May 31 02:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:54:49 2012] Updating source flux to 6e-14
[Thu May 31 02:56:21 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Thu May 31 02:56:21 2012] Flag c found in src. 6 procflags, skipping spectral fitting