[Wed May 30 09:21:34 2012] Detection parameters:
  Position = (161.0, 243.6) = 5 42 15.96 -66 42 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.2 +/- 11.9
  Background counts = 28.8
  Rate = 0.002 +/- 0.0004

[Wed May 30 09:21:35 2012] Off-axis axis estimate = 10.73'
[Wed May 30 09:43:39 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Wed May 30 09:43:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 09:43:39 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Wed May 30 09:43:39 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Wed May 30 09:43:39 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.79"
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22.csv
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22.csv
[Wed May 30 12:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May 30 12:16:04 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed May 30 12:16:14 2012] Spatial fit model total counts = 301.460000, observed total counts = 302.000000
[Wed May 30 12:16:14 2012] Offset between fit and detection position for source 28 = 0.971783 pixels
[Wed May 30 12:16:14 2012] 301.603100 total counts/ 210.977000 bgd. counts: snr = 6.239298
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.971783 pixels
  Position = (160.1, 243.9) = 5 42 16.62 -66 42 44.1
  Extent = 11.5 (8.2-17.3)", rotation angle = 0
  Source counts = 90.6 +/- 17.4
  Background counts = 211.0
  Rate = 0.002 +/- 0.0004
[Wed May 30 12:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 30 12:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 12:16:14 2012] Assessing source extent using major axis lower bound
[Wed May 30 12:16:14 2012] Source does appear to be extended
[Wed May 30 12:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 20:30:29 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Wed May 30 20:30:29 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.907
[Wed May 30 20:30:29 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.53"
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22.csv
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22.csv
[Thu May 31 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu May 31 00:02:19 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu May 31 00:02:27 2012] Warning, spatial fit 22 centroid is now closest to src. 29
[Thu May 31 00:02:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:02:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:02:27 2012] Source does appear to be extended
[Thu May 31 00:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:32:55 2012] XMMSAS src. selection expression = ellipse(13879.275400, 21173.012200, 691.530020, 691.530020, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing source region out to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28_src.reg
[Thu May 31 01:32:55 2012] Extracting stamp from image fullrun_mos2_xmm0604590401_pi300-10000_cl_sm2.00.img.gz, (120, 204) - (200, 284)
[Thu May 31 01:32:55 2012] XMMSAS bgd. selection expression = annulus(13879.275400, 21173.012200, 1152.550033, 2305.100066, X, Y)
[Thu May 31 01:32:55 2012] Writing fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28.gif
[Thu May 31 01:45:00 2012] Mean detx,y = (-11224.41, 2038.65) 
[Thu May 31 01:45:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:45:10 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:45:10 2012] Setting source spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu May 31 01:45:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu May 31 02:40:12 2012] Not generating rmf since there are only 90 counts
[Thu May 31 02:40:12 2012] rmf not generated due to insufficient counts
[Thu May 31 02:54:49 2012] Updating aperture counts using extracted products
[Thu May 31 02:54:49 2012] Error reading totcts from fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu May 31 02:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:54:49 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src28.arf
[Thu May 31 02:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:54:49 2012] Updating source flux to 3.3e-14
[Thu May 31 02:56:21 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting