[Wed May 30 09:21:34 2012] Detection parameters:
  Position = (267.7, 347.9) = 5 40 57.53 -66 35 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.2 +/- 14.0
  Background counts = 40.4
  Rate = 0.002 +/- 0.0003

[Wed May 30 09:21:35 2012] Off-axis axis estimate = 4.22'
[Wed May 30 09:43:39 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed May 30 09:43:39 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Wed May 30 09:43:39 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Wed May 30 09:43:39 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.54"
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 30 12:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17.csv
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 30 12:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17.csv
[Wed May 30 12:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 30 12:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:14 2012] Source 22 is offset by -7.102005 and 6.764682 pixels which is larger than
2 X fitted extent = 0.984141 x 0.984141, not incorporating fit results
[Wed May 30 12:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 30 12:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 12:16:14 2012] Assessing source extent using major
[Wed May 30 12:16:14 2012] Source does appear to be extended
[Wed May 30 12:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:30:29 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed May 30 20:30:29 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Wed May 30 20:30:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Wed May 30 20:30:29 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.54"
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17.csv
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17.csv
[Thu May 31 00:02:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May 31 00:02:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May 31 00:02:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 31 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:27 2012] Spatial fit model total counts = -163.328000, observed total counts = 322.000000
[Thu May 31 00:02:27 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 00:02:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:02:27 2012] Assessing source extent using major
[Thu May 31 00:02:27 2012] Source does appear to be extended
[Thu May 31 00:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:32:55 2012] XMMSAS src. selection expression = ellipse(23245.553528, 30219.901306, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing source region out to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22_src.reg
[Thu May 31 01:32:55 2012] Extracting stamp from image fullrun_mos2_xmm0604590401_pi300-10000_cl_sm2.00.img.gz, (230, 310) - (305, 385)
[Thu May 31 01:32:55 2012] XMMSAS bgd. selection expression = annulus(23245.553528, 30219.901306, 1087.500000, 2175.000000, X, Y) && !ellipse(21041.463200, 28600.462400, 359.779210, 359.779210, 0.000000, X, Y) && !ellipse(22753.936000, 26908.222000, 1561.920045, 1561.920045, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22.gif
[Thu May 31 01:43:52 2012] Mean detx,y = (-1146.54, -6067.43) 
[Thu May 31 01:43:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:44:09 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:44:09 2012] Setting source spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May 31 01:44:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu May 31 02:31:36 2012] Not generating rmf since there are only 88 counts
[Thu May 31 02:31:36 2012] rmf not generated due to insufficient counts
[Thu May 31 02:54:49 2012] Updating aperture counts using extracted products
[Thu May 31 02:54:49 2012] Error reading totcts from fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May 31 02:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:54:49 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src22.arf
[Thu May 31 02:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:54:49 2012] Updating source flux to 2.6e-14
[Thu May 31 02:56:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting