[Wed May 30 09:21:34 2012] Detection parameters:
  Position = (287.9, 128.9) = 5 40 42.89 -66 51 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 13.2
  Background counts = 35.7
  Rate = 0.001 +/- 0.0003

[Wed May 30 09:21:35 2012] Off-axis axis estimate = 12.31'
[Wed May 30 09:43:39 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Wed May 30 09:43:39 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Wed May 30 09:43:39 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.782
[Wed May 30 09:43:39 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.58"
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28.csv
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 30 12:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28.csv
[Wed May 30 12:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 30 12:16:04 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed May 30 12:16:14 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.800850 pixels away
[Wed May 30 12:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 30 12:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 12:16:14 2012] Assessing source extent using major
[Wed May 30 12:16:14 2012] Source does appear to be extended
[Wed May 30 12:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:30:29 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Wed May 30 20:30:29 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Wed May 30 20:30:29 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.782
[Wed May 30 20:30:29 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.58"
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27.csv
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu May 31 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27.csv
[Thu May 31 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu May 31 00:02:19 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu May 31 00:02:27 2012] Spatial fit model total counts = 420.156000, observed total counts = 414.000000
[Thu May 31 00:02:27 2012] Offset between fit and detection position for source 18 = 6.037235 pixels
[Thu May 31 00:02:27 2012] 433.195000 total counts/ 266.809000 bgd. counts: snr = 10.186302
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 6.037235 pixels
  Position = (282.0, 127.7) = 5 40 47.25 -66 51 11.7
  Extent = 25.2 (25.1-50.3)", rotation angle = 0
  Source counts = 166.4 +/- 20.8
  Background counts = 266.8
  Rate = 0.003 +/- 0.0004
[Thu May 31 00:02:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:02:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:02:27 2012] Source does appear to be extended
[Thu May 31 00:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:32:55 2012] XMMSAS src. selection expression = ellipse(24487.352000, 11061.235000, 1510.176043, 1510.176043, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing source region out to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18_src.reg
[Thu May 31 01:32:55 2012] Extracting stamp from image fullrun_mos2_xmm0604590401_pi300-10000_cl_sm2.00.img.gz, (195, 41) - (369, 214)
[Thu May 31 01:32:55 2012] XMMSAS bgd. selection expression = annulus(24487.352000, 11061.235000, 2516.960072, 5033.920145, X, Y) && !ellipse(19893.223267, 16830.056229, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18.gif
[Thu May 31 01:45:53 2012] Mean detx,y = (-1445.92, 12983.53) 
[Thu May 31 01:45:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:46:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:46:22 2012] Setting source spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 31 01:46:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May 31 02:54:49 2012] Updating aperture counts using extracted products
[Thu May 31 02:54:49 2012] Error reading totcts from fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 31 02:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:54:49 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src18.arf
[Thu May 31 02:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:54:49 2012] Updating source flux to 6.9e-14