[Wed May 30 09:21:34 2012] Detection parameters:
  Position = (305.2, 268.4) = 5 40 30.19 -66 40 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.1 +/- 23.2
  Background counts = 40.1
  Rate = 0.004 +/- 0.0005

[Wed May 30 09:21:35 2012] Off-axis axis estimate = 2.23'
[Wed May 30 09:43:39 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Wed May 30 09:43:39 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Wed May 30 09:43:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Wed May 30 09:43:39 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.55"
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12.ximg exists
[Wed May 30 12:16:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12.csv
[Wed May 30 12:16:03 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May 30 12:16:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12.csv
[Wed May 30 12:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May 30 12:16:04 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 30 12:16:04 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May 30 12:16:14 2012] Source 15 is offset by 7.134024 and -4.889459 pixels which is larger than
2 X fitted extent = 2.662350 x 2.662350, not incorporating fit results
[Wed May 30 12:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 30 12:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 12:16:14 2012] Assessing source extent using major
[Wed May 30 12:16:14 2012] Source does appear to be extended
[Wed May 30 12:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:30:29 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Wed May 30 20:30:29 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Wed May 30 20:30:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Wed May 30 20:30:29 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.55"
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12.csv
[Thu May 31 00:02:18 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May 31 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12.csv
[Thu May 31 00:02:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May 31 00:02:19 2012] fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May 31 00:02:19 2012] Fit fullrun_mos2_xmm0604590401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu May 31 00:02:27 2012] Source 15 is offset by 7.134024 and -4.905161 pixels which is larger than
2 X fitted extent = 2.703476 x 2.703476, not incorporating fit results
[Thu May 31 00:02:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:02:27 2012] Assessing source extent using major
[Thu May 31 00:02:27 2012] Source does appear to be extended
[Thu May 31 00:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:32:55 2012] XMMSAS src. selection expression = ellipse(26503.524048, 23300.271027, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing source region out to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15_src.reg
[Thu May 31 01:32:55 2012] Extracting stamp from image fullrun_mos2_xmm0604590401_pi300-10000_cl_sm2.00.img.gz, (268, 231) - (343, 306)
[Thu May 31 01:32:55 2012] XMMSAS bgd. selection expression = annulus(26503.524048, 23300.271027, 1087.500000, 2175.000000, X, Y) && !ellipse(24551.460000, 24372.344000, 995.664029, 995.664029, 0.000000, X, Y) && !ellipse(23988.311249, 24827.109344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.335175, 24380.565277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23686.331600, 23590.862000, 1377.416040, 1377.416040, 0.000000, X, Y) && !ellipse(23910.479065, 23971.789001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24083.754242, 22892.615173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23227.684000, 26336.354000, 1243.352036, 319.314409, 226.697000, X, Y) && !ellipse(27739.912781, 25116.645599, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 01:32:55 2012] Writing fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15.gif
[Thu May 31 01:42:50 2012] Mean detx,y = (1463.69, 893.13) 
[Thu May 31 01:42:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:42:56 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:42:57 2012] Setting source spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 31 01:42:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 31 02:28:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 02:28:00 2012] rmf not generated due to insufficient counts
[Thu May 31 02:54:49 2012] Updating aperture counts using extracted products
[Thu May 31 02:54:49 2012] Error reading totcts from fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 31 02:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:54:49 2012] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0604590401_pi300-10000_pass1_cl_src15.arf
[Thu May 31 02:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:54:49 2012] Updating source flux to 3.6e-14
[Thu May 31 02:56:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting