[Sat Jun 16 09:38:59 2012] Detection parameters:
  Position = (278.0, 288.9) = 5 40 43.99 -66 40 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124645.6 +/- 412.6
  Background counts = 26.1
  Rate = 4 +/- 0.01

[Sat Jun 16 09:38:59 2012] Off-axis axis estimate = 1.63'
[Sat Jun 16 09:59:48 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 09:59:48 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jun 16 09:59:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sat Jun 16 09:59:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Jun 16 12:23:30 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 12:23:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 12:23:30 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 12:23:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 12:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 12:23:30 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 12:23:30 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 12:23:30 2012] Fit fullrun_mos2_xmm0604590301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 12:23:39 2012] Spatial fit model total counts = 127609.000000, observed total counts = 125433.000000
[Sat Jun 16 12:23:39 2012] Offset between fit and detection position for source 1 = 0.103820 pixels
[Sat Jun 16 12:23:39 2012] 124564.000000 total counts/ 25600.000000 bgd. counts: snr = 618.525000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.103820 pixels
  Position = (278.1, 288.8) = 5 40 43.95 -66 40 11.3
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 98964.0 +/- 352.9
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat Jun 16 12:23:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 12:23:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 12:23:39 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 12:23:39 2012] Source does appear to be extended
[Sat Jun 16 12:23:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 12:35:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 12:35:42 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Sat Jun 16 12:35:42 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Sat Jun 16 12:35:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.59"
[Sat Jun 16 13:32:34 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 13:32:34 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 13:32:34 2012] Fit fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 16 13:32:34 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 13:32:34 2012] fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 13:32:34 2012] Fit fullrun_mos2_xmm0604590301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 13:32:37 2012] Spatial fit model total counts = 125976.000000, observed total counts = 125420.000000
[Sat Jun 16 13:32:37 2012] Offset between fit and detection position for source 1 = 0.025319 pixels
[Sat Jun 16 13:32:37 2012] 125065.100000 total counts/ 25600.000000 bgd. counts: snr = 621.656875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025319 pixels
  Position = (278.1, 288.8) = 5 40 43.95 -66 40 11.4
  Extent = 7.6 (7.6-7.7)", rotation angle = 0
  Source counts = 99465.1 +/- 353.6
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat Jun 16 13:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 13:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 13:32:37 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 13:32:37 2012] Source does appear to be extended
[Sat Jun 16 13:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 13:59:29 2012] Counts = 99465.100000, rescaling region sizes by 3.000000
[Sat Jun 16 13:59:29 2012] XMMSAS src. selection expression = ellipse(24144.755760, 25077.157740, 1373.504440, 1373.504440, 0.000000, X, Y)
[Sat Jun 16 13:59:29 2012] Writing source region out to fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 13:59:29 2012] Extracting stamp from image fullrun_mos2_xmm0604590301_pi300-10000_cl_sm2.00.img.gz, (199, 210) - (357, 368)
[Sat Jun 16 13:59:29 2012] XMMSAS bgd. selection expression = annulus(24144.755760, 25077.157740, 6867.522198, 13735.044395, X, Y) && !ellipse(23370.329285, 25719.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23283.589478, 25284.759399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24972.679291, 27878.847809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22678.285278, 24243.140961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23899.478200, 27512.918560, 557.277616, 557.277616, 0.000000, X, Y) && !ellipse(26324.664000, 23290.726000, 1177.080034, 1177.080034, 0.000000, X, Y) && !ellipse(23776.709180, 28358.525000, 929.752027, 929.752027, 0.000000, X, Y) && !ellipse(22227.144000, 24841.657200, 1617.552047, 274.264808, 356.128000, X, Y)
[Sat Jun 16 13:59:29 2012] Writing fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 13:59:38 2012] Mean detx,y = (34.26, -69.54) 
[Sat Jun 16 13:59:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 14:03:58 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 14:03:58 2012] Setting source spectrum file to fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 14:03:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 14:34:04 2012] Updating aperture counts using extracted products
[Sat Jun 16 14:34:04 2012] Error reading totcts from fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 14:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 14:34:04 2012] Using photon index=1.80, rate=3.15, arf fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 14:34:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 14:34:04 2012] Updating source flux to 3e-11
[Sat Jun 16 14:37:47 2012] Reading fit data from xmm0604590301/analysis//spectral/fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 14:37:47 2012] Spectral fit parameter nH value = 2.57805e+21
[Sat Jun 16 14:37:47 2012] Spectral fit parameter PhoIndex value = 8.92706
[Sat Jun 16 14:37:47 2012] Failed to get F(0.3-8.0) from xmm0604590301/analysis//spectral/fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 14:37:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 14:37:47 2012] Using Nh = 2.6e+21, photon index=8.93, rate=3.15, arf fullrun_mos2_xmm0604590301_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 14:37:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 14:37:47 2012] Updating source flux to 1.9e-11