[Tue Jul 10 02:44:15 2012] Detection parameters:
  Position = (336.2, 360.1) = 9 27 37.38 30 5 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.1 +/- 17.8
  Background counts = 97.9
  Rate = 0.003 +/- 0.0006

[Tue Jul 10 02:44:15 2012] Off-axis axis estimate = 5.24'
[Tue Jul 10 03:19:04 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 03:19:04 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Tue Jul 10 03:19:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Tue Jul 10 03:19:04 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.05"
[Tue Jul 10 03:44:09 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jul 10 03:44:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13.csv
[Tue Jul 10 03:44:09 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jul 10 03:44:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13.csv
[Tue Jul 10 03:44:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 03:44:09 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jul 10 03:44:09 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jul 10 03:44:09 2012] Fit fullrun_mos2_xmm0604530101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jul 10 03:44:16 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.385758 pixels away
[Tue Jul 10 03:44:16 2012] Spatial fit model total counts = 352.250000, observed total counts = 320.000000
[Tue Jul 10 03:44:16 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 03:44:16 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 03:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 03:44:16 2012] Assessing source extent using major
[Tue Jul 10 03:44:16 2012] Source does appear to be extended
[Tue Jul 10 03:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 04:11:53 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 04:11:53 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Tue Jul 10 04:11:53 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Tue Jul 10 04:11:53 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.05"
[Tue Jul 10 04:36:10 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul 10 04:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13.csv
[Tue Jul 10 04:36:10 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul 10 04:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13.csv
[Tue Jul 10 04:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 04:36:10 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul 10 04:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 10 04:36:10 2012] fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul 10 04:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 10 04:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604530101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 04:36:19 2012] Source 13 is offset by -3.219154 and -4.554464 pixels which is larger than
2 X fitted extent = 3.303416 x 3.303416, not incorporating fit results
[Tue Jul 10 04:36:19 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.518714 pixels away
[Tue Jul 10 04:36:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 04:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 04:36:19 2012] Assessing source extent using major
[Tue Jul 10 04:36:19 2012] Source does appear to be extended
[Tue Jul 10 04:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 05:12:26 2012] XMMSAS src. selection expression = ellipse(29199.103607, 31283.593658, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 05:12:26 2012] Writing source region out to fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13_src.reg
[Tue Jul 10 05:12:26 2012] Extracting stamp from image fullrun_mos2_xmm0604530101_pi300-10000_cl_sm2.00.img.gz, (299, 323) - (374, 398)
[Tue Jul 10 05:12:26 2012] XMMSAS bgd. selection expression = annulus(29199.103607, 31283.593658, 1087.500000, 2175.000000, X, Y) && !ellipse(29924.216003, 31361.909058, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 05:12:26 2012] Writing fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13.gif
[Tue Jul 10 05:15:14 2012] Mean detx,y = (5639.72, -6062.31) 
[Tue Jul 10 05:15:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 05:15:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 05:15:34 2012] Setting source spectrum file to fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jul 10 05:15:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jul 10 05:26:05 2012] Not generating rmf since there are only 89 counts
[Tue Jul 10 05:26:05 2012] rmf not generated due to insufficient counts
[Tue Jul 10 05:31:21 2012] Updating aperture counts using extracted products
[Tue Jul 10 05:31:21 2012] Error reading totcts from fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jul 10 05:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 05:31:21 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0604530101_pi300-10000_pass1_cl_src13.arf
[Tue Jul 10 05:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 05:31:21 2012] Updating source flux to 4.2e-14
[Tue Jul 10 05:31:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting