[Mon Jun 10 12:13:21 2013] Detection parameters:
  Position = (88.2, 298.5) = 22 28 3.51 65 35 39.1
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 55.1 +/- 14.5
  Background counts = 247.6
  Rate = 0.0007 +/- 0.0002

[Mon Jun 10 12:13:21 2013] Off-axis axis estimate = 15.24'
[Mon Jun 10 12:30:23 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 12:30:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 12:30:23 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Mon Jun 10 12:30:23 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.898
[Mon Jun 10 12:30:23 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 14.05"
[Mon Jun 10 13:03:07 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 10 13:03:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11.csv
[Mon Jun 10 13:03:07 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 10 13:03:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11.csv
[Mon Jun 10 13:03:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:03:07 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 10 13:03:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 10 13:03:07 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 10 13:03:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 10 13:03:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604420101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:20:53 2013] Warning, spatial fit 11 centroid is now closest to src. 4
[Mon Jun 10 13:20:53 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:20:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:20:53 2013] Assessing source extent using major
[Mon Jun 10 13:20:53 2013] Source does appear to be extended
[Mon Jun 10 13:20:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 13:22:46 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 13:22:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 13:22:46 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Mon Jun 10 13:22:46 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.898
[Mon Jun 10 13:22:46 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 14.05"
[Mon Jun 10 13:34:05 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun 10 13:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10.csv
[Mon Jun 10 13:34:05 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun 10 13:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10.csv
[Mon Jun 10 13:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:34:05 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun 10 13:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 10 13:34:05 2013] fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun 10 13:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 10 13:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604420101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 13:53:06 2013] Warning, spatial fit 10 centroid is now closest to src. 4
[Mon Jun 10 13:53:06 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 13:53:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 13:53:06 2013] Assessing source extent using major
[Mon Jun 10 13:53:06 2013] Source does appear to be extended
[Mon Jun 10 13:53:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 14:30:49 2013] XMMSAS src. selection expression = ellipse(7622.488968, 25919.138824, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 14:30:49 2013] Writing source region out to fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 10 14:30:49 2013] Extracting stamp from image fullrun_mos1_xmm0604420101_pi300-10000_cl_sm2.00.img.gz, (13, 223) - (163, 373)
[Mon Jun 10 14:30:49 2013] XMMSAS bgd. selection expression = annulus(7622.488968, 25919.138824, 2175.000000, 4350.000000, X, Y) && !ellipse(8346.214775, 24757.335175, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 14:30:49 2013] Writing fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6.gif
[Mon Jun 10 14:34:08 2013] Mean detx,y = (12370.51, 10132.76) 
[Mon Jun 10 14:34:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 14:34:46 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 14:34:46 2013] Setting source spectrum file to fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 10 14:34:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun 10 14:42:52 2013] Not generating rmf since there are only 55 counts
[Mon Jun 10 14:42:52 2013] rmf not generated due to insufficient counts
[Mon Jun 10 15:09:00 2013] Updating aperture counts using extracted products
[Mon Jun 10 15:09:00 2013] Total counts from fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1219.00
[Mon Jun 10 15:09:00 2013] Total counts from fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 5796.00
[Mon Jun 10 15:09:00 2013] Got source and background scale factors 3386192.000000, 18319357.000000
[Mon Jun 10 15:09:00 2013] User source parameters:
  Position = (88.2, 298.5) = 22 28 3.51 65 35 39.1
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 147.7 +/- 35.9
  Background aperture counts = 1071.3
  Rate = 0.002 +/- 0.0005

[Mon Jun 10 15:09:00 2013] Updating counts from extracted products
[Mon Jun 10 15:09:00 2013] Set source signif. to 147.65/32.73 = 4.51
[Mon Jun 10 15:09:01 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 15:09:01 2013] Using photon index=1.80, rate=0.00208, arf fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6.arf
[Mon Jun 10 15:09:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 15:09:01 2013] Updating source flux to 7.9e-14
[Mon Jun 10 15:09:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 15:09:06 2013] xmm0604420101/analysis//spectral/fullrun_mos1_xmm0604420101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete