[Thu Jun 13 01:06:47 2013] Detection parameters:
  Position = (329.3, 324.1) = 16 47 2.50 -45 51 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.9 +/- 29.1
  Background counts = 168.7
  Rate = 0.01 +/- 0.0009

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 2.91'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Thu Jun 13 01:10:47 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.88"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 03:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 03:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 4196.910000, observed total counts = 3236.000000
[Thu Jun 13 07:02:42 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:58 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Thu Jun 13 07:02:58 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.88"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Source 8 is offset by 1.855123 and -4.962472 pixels which is larger than
2 X fitted extent = 3.345058 x 1.241995, not incorporating fit results
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(28598.368713, 28146.426971, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (292, 287) - (367, 362)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(28598.368713, 28146.426971, 1087.500000, 2175.000000, X, Y) && !ellipse(26952.045200, 27647.274400, 470.321614, 411.458412, 2.798452, X, Y) && !ellipse(28048.472321, 29196.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27308.130676, 29438.361572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.521000, 29633.312600, 695.018420, 625.732018, 101.969100, X, Y) && !ellipse(27996.039800, 27459.385600, 403.060812, 403.060812, 0.000000, X, Y) && !ellipse(28030.991608, 30369.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.816284, 29447.396637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29447.147064, 27388.360352, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8.gif
[Thu Jun 13 15:16:15 2013] Mean detx,y = (1663.29, -611.69) 
[Thu Jun 13 15:16:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:16:46 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:16:46 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 13 15:16:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 13 16:19:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 16:19:47 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:12 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:12 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 2126.00
[Thu Jun 13 17:27:12 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 4799.00
[Thu Jun 13 17:27:12 2013] Got source and background scale factors 1112858.000000, 3819379.000000
[Thu Jun 13 17:27:12 2013] User source parameters:
  Position = (329.3, 324.1) = 16 47 2.50 -45 51 41.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 727.7 +/- 47.1
  Background aperture counts = 1398.3
  Rate = 0.02 +/- 0.001

[Thu Jun 13 17:27:12 2013] Updating counts from extracted products
[Thu Jun 13 17:27:12 2013] Set source signif. to 727.71/37.39 = 19.46
[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 1.2e-13
[Thu Jun 13 17:27:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete