[Thu Jun 13 01:06:47 2013] Detection parameters:
  Position = (325.0, 341.1) = 16 47 4.27 -45 50 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2746.2 +/- 66.9
  Background counts = 168.9
  Rate = 0.08 +/- 0.002

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 3.64'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Thu Jun 13 01:10:47 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.697
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.25"
[Thu Jun 13 03:39:01 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 7717.080000, observed total counts = 7183.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 6 = 0.297098 pixels
[Thu Jun 13 07:02:42 2013] 7084.050000 total counts/ 5169.990000 bgd. counts: snr = 26.620162
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.297098 pixels
  Position = (324.7, 341.2) = 16 47 4.39 -45 50 36.7
  Extent = 8.7 (7.8-9.6)" x 7.8 (7.1-8.8)", rotation angle = 102 (43-136) degrees
  Source counts = 1914.1 +/- 84.2
  Background counts = 5170.0
  Rate = 0.05 +/- 0.002
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Thu Jun 13 07:02:42 2013] Source is confused with source 2
[Thu Jun 13 07:02:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Thu Jun 13 07:02:58 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.087
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.25"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 5 centroid is now closest to src. 3
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Thu Jun 13 15:07:13 2013] Counts = 1914.060000, rescaling region sizes by 2.000000
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(28204.521000, 29633.312600, 1042.527630, 938.598027, 101.969100, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (265, 281) - (385, 401)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(28204.521000, 29633.312600, 3475.092100, 6950.184200, X, Y) && !ellipse(26952.045200, 27647.274400, 470.321614, 411.458412, 2.798452, X, Y) && !ellipse(28048.472321, 29196.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27308.130676, 29438.361572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.368713, 28146.426971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27996.039800, 27459.385600, 403.060812, 403.060812, 0.000000, X, Y) && !ellipse(26253.733600, 31634.545000, 387.467211, 387.467211, 0.000000, X, Y) && !ellipse(34090.251678, 32918.404053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28055.496940, 23098.906800, 452.035213, 452.035213, 0.000000, X, Y) && !ellipse(23549.124268, 35796.062866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.109619, 31148.681000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.991608, 30369.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.816284, 29447.396637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.202820, 29020.481201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29447.147064, 27388.360352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32152.125427, 26024.769165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.059700, 23822.034400, 476.539214, 290.997608, 136.299000, X, Y) && !ellipse(31091.255371, 23129.515472, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6.gif
[Thu Jun 13 15:13:40 2013] Mean detx,y = (1354.87, -2048.98) 
[Thu Jun 13 15:13:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:14:51 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:14:51 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 13 15:14:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun 13 17:27:11 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:12 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 9355.00
[Thu Jun 13 17:27:12 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 56648.00
[Thu Jun 13 17:27:12 2013] Got source and background scale factors 2694504.000000, 90439771.000000
[Thu Jun 13 17:27:12 2013] User source parameters:
  Position = (324.7, 341.2) = 16 47 4.39 -45 50 36.7
  Extent = 8.7 (7.8-9.6)" x 7.8 (7.1-8.8)", rotation angle = 102 (43-136) degrees
  Source aperture counts = 7667.3 +/- 97.7
  Background aperture counts = 1687.7
  Rate = 0.2 +/- 0.002

[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.0463, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 3.5e-13
[Thu Jun 13 17:27:30 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete