[Thu Jun 13 01:06:49 2013] Detection parameters:
  Position = (169.7, 234.0) = 16 48 9.07 -45 58 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 14.2
  Background counts = 36.0
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 10.44'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 11.65"
[Thu Jun 13 01:10:47 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.040
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 11.65"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src49.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src49 appears to have run properly
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Jun 13 03:39:03 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 444.475000, observed total counts = 461.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 50 = 2.390639 pixels
[Thu Jun 13 07:02:42 2013] 397.898500 total counts/ 48.196500 bgd. counts: snr = 50.372136
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 2.390639 pixels
  Position = (167.9, 232.4) = 16 48 9.82 -45 58 29.1
  Extent = 23.3 (18.7-46.6)" x 10.7 (9.2-13.6)", rotation angle = 352 (343-1) degrees
  Source counts = 349.7 +/- 19.9
  Background counts = 48.2
  Rate = 0.008 +/- 0.0005
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu Jun 13 07:02:42 2013] Source is confused with source 20
[Thu Jun 13 07:02:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 17.00"
[Thu Jun 13 07:02:58 2013] source mask rpix=3.9, npix_max = 77, mask sum = 52, frac = 0.669
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 17.00"
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:26 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jun 13 09:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jun 13 09:02:26 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jun 13 09:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jun 13 09:02:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 41 centroid is now closest to src. 18
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu Jun 13 15:07:14 2013] XMMSAS src. selection expression = ellipse(14556.377600, 20168.403000, 1397.874040, 642.582018, 352.445410, X, Y)
[Thu Jun 13 15:07:14 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_src.reg
[Thu Jun 13 15:07:14 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (88, 152) - (248, 313)
[Thu Jun 13 15:07:14 2013] XMMSAS bgd. selection expression = annulus(14556.377600, 20168.403000, 2329.790067, 4659.580134, X, Y) && !ellipse(15392.004745, 22319.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11750.440903, 23092.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12045.139862, 20154.999863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10963.334000, 19925.154000, 2082.672060, 260.334407, 357.055330, X, Y) && !ellipse(13192.818000, 20149.850000, 1937.208056, 699.453620, 345.770400, X, Y) && !ellipse(14263.000000, 21590.401627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13491.760452, 20310.499619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9701.165833, 20212.035202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9587.654701, 22217.161118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15539.734558, 20736.090195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.938416, 20629.351379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15309.579400, 20242.939800, 1820.816052, 789.261623, 359.091115, X, Y)
[Thu Jun 13 15:07:14 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50.gif
[Thu Jun 13 15:41:34 2013] Mean detx,y = (-12654.03, 6646.76) 
[Thu Jun 13 15:41:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:42:03 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:42:03 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Jun 13 15:42:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Jun 13 17:27:18 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:18 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 734.00
[Thu Jun 13 17:27:18 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_bgd.pi.gz = 7629.00
[Thu Jun 13 17:27:18 2013] Got source and background scale factors 2097112.000000, 20263330.000000
[Thu Jun 13 17:27:18 2013] User source parameters:
  Position = (167.9, 232.4) = 16 48 9.82 -45 58 29.1
  Extent = 23.3 (18.7-46.6)" x 10.7 (9.2-13.6)", rotation angle = 352 (343-1) degrees
  Source aperture counts = -55.5 +/- 28.1
  Background aperture counts = 789.5
  Rate = -0.001 +/- 0.0007

[Thu Jun 13 17:27:20 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:20 2013] Using photon index=1.80, rate=0.00846, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50.arf
[Thu Jun 13 17:27:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:20 2013] Updating source flux to 1.8e-13
[Thu Jun 13 17:27:30 2013] Flag c found in src. 50 procflags, skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete