[Thu Jun 13 01:06:49 2013] Detection parameters:
  Position = (159.7, 242.0) = 16 48 13.22 -45 57 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 13.2
  Background counts = 35.7
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 10.86'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Jun 13 01:10:47 2013] source mask rpix=2.7, npix_max = 41, mask sum = 39, frac = 0.937
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 11.86"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44.csv
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44.csv
[Thu Jun 13 03:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Thu Jun 13 03:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Source 45 is offset by 2.290518 and -1.641002 pixels which is larger than
2 X fitted extent = 1.609145 x 1.609145, not incorporating fit results
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 784.517000, observed total counts = 782.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 45 = 1.740102 pixels
[Thu Jun 13 07:02:42 2013] Warning, changing simple spatial fit ID from 44 to 39
[Thu Jun 13 07:02:42 2013] 776.721000 total counts/ 776.721000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.740102 pixels
  Position = (158.7, 243.3) = 16 48 13.65 -45 57 41.3
  Extent = 3.0 (3.0-45.5)", rotation angle = 0
  Source counts = 0.0 +/- 27.9
  Background counts = 776.7
  Rate = 2e-20 +/- 0.0007
  Deleting source due to low Poisson probability