[Thu Jun 13 01:06:48 2013] Detection parameters:
  Position = (333.9, 274.1) = 16 47 0.55 -45 55 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.6 +/- 21.0
  Background counts = 112.3
  Rate = 0.004 +/- 0.0006

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 3.12'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Jun 13 01:10:47 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.733
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 7.99"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src34.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src34 appears to have run properly
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu Jun 13 03:39:03 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 1312.670000, observed total counts = 1313.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 35 = 0.253735 pixels
[Thu Jun 13 07:02:42 2013] 1328.980300 total counts/ 1237.940000 bgd. counts: snr = 2.587521
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.253735 pixels
  Position = (334.0, 274.4) = 16 47 0.50 -45 55 27.2
  Extent = 6.0 (4.2-8.8)" x 3.6 (2.6-5.5)", rotation angle = 136 (288-0) degrees
  Source counts = 91.0 +/- 36.5
  Background counts = 1237.9
  Rate = 0.002 +/- 0.0009
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Thu Jun 13 07:02:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 4.80"
[Thu Jun 13 07:02:58 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.168
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 4.80"
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:26 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jun 13 09:02:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jun 13 09:02:26 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jun 13 09:02:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jun 13 09:02:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 33 centroid is now closest to src. 37
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(29012.059700, 23822.034400, 357.404410, 218.248206, 136.299000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (313, 254) - (355, 295)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(29012.059700, 23822.034400, 595.674017, 1191.348034, X, Y) && !ellipse(28055.496940, 23098.906800, 452.035213, 452.035213, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35.gif
[Thu Jun 13 15:36:49 2013] Mean detx,y = (1958.12, 3698.89) 
[Thu Jun 13 15:36:52 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:37:03 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:37:03 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jun 13 15:37:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jun 13 16:43:42 2013] Not generating rmf since there are only 91 counts
[Thu Jun 13 16:43:42 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:17 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:17 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 243.00
[Thu Jun 13 17:27:17 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1810.00
[Thu Jun 13 17:27:17 2013] Got source and background scale factors 244800.000000, 3025308.000000
[Thu Jun 13 17:27:17 2013] User source parameters:
  Position = (334.0, 274.4) = 16 47 0.50 -45 55 27.2
  Extent = 6.0 (4.2-8.8)" x 3.6 (2.6-5.5)", rotation angle = 136 (288-0) degrees
  Source aperture counts = 96.5 +/- 16.6
  Background aperture counts = 146.5
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.0022, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 2.5e-14
[Thu Jun 13 17:27:30 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete