[Thu Jun 13 01:06:48 2013] Detection parameters:
  Position = (245.5, 358.6) = 16 47 37.38 -45 49 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 18.5
  Background counts = 103.2
  Rate = 0.005 +/- 0.0008

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 5.81'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Thu Jun 13 01:10:47 2013] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.643
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.33"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25.csv
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25.csv
[Thu Jun 13 03:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 13 03:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Source 26 is offset by 7.244616 and -2.296262 pixels which is larger than
2 X fitted extent = 1.072874 x 1.072874, not incorporating fit results
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:58 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Thu Jun 13 07:02:58 2013] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.643
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 9.33"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Source 26 is offset by 6.977996 and -2.292731 pixels which is larger than
2 X fitted extent = 1.073572 x 1.073572, not incorporating fit results
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(21308.109619, 31148.681000, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (208, 321) - (283, 396)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(21308.109619, 31148.681000, 1087.500000, 2175.000000, X, Y) && !ellipse(19547.898209, 34156.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.202820, 29020.481201, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26.gif
[Thu Jun 13 15:29:35 2013] Mean detx,y = (-5412.87, -3946.81) 
[Thu Jun 13 15:29:38 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:29:54 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:29:54 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 13 15:29:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jun 13 16:39:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 16:39:41 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:15 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:15 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 734.00
[Thu Jun 13 17:27:15 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 5247.00
[Thu Jun 13 17:27:15 2013] Got source and background scale factors 1209677.000000, 10193691.000000
[Thu Jun 13 17:27:15 2013] User source parameters:
  Position = (245.5, 358.6) = 16 47 37.38 -45 49 21.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.3 +/- 28.1
  Background aperture counts = 622.7
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 17:27:15 2013] Updating counts from extracted products
[Thu Jun 13 17:27:15 2013] Set source signif. to 111.34/24.95 = 4.46
[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.00269, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 3.2e-14
[Thu Jun 13 17:27:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete