[Thu Jun 13 01:06:48 2013] Detection parameters:
  Position = (204.7, 414.5) = 16 47 54.30 -45 45 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 14.7
  Background counts = 48.1
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 10.82'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 11.84"
[Thu Jun 13 01:10:47 2013] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.181
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.84"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 13 03:39:03 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 604.324000, observed total counts = 616.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 23 = 4.244143 pixels
[Thu Jun 13 07:02:42 2013] 530.590000 total counts/ 25.463000 bgd. counts: snr = 100.102701
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 4.244143 pixels
  Position = (209.0, 414.6) = 16 47 52.53 -45 45 16.8
  Extent = 23.7 (23.7-47.4)", rotation angle = 0
  Source counts = 505.1 +/- 23.0
  Background counts = 25.5
  Rate = 0.01 +/- 0.0006
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 23.68"
[Thu Jun 13 07:02:58 2013] source mask rpix=5.4, npix_max = 141, mask sum = 131, frac = 0.927
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 23.68"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 21 centroid is now closest to src. 24
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(18130.210000, 36023.981200, 1420.512041, 1420.512041, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (127, 333) - (291, 496)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(18130.210000, 36023.981200, 2367.520068, 4735.040136, X, Y) && !ellipse(13513.061752, 30731.504211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12629.911392, 31654.158752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23549.124268, 35796.062866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17920.285599, 34238.049194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19547.898209, 34156.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.109619, 31148.681000, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23.gif
[Thu Jun 13 15:26:58 2013] Mean detx,y = (-8650.23, -8465.62) 
[Thu Jun 13 15:27:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:27:45 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:27:45 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jun 13 15:27:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jun 13 17:27:14 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:14 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1426.00
[Thu Jun 13 17:27:14 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 9956.00
[Thu Jun 13 17:27:15 2013] Got source and background scale factors 3486263.000000, 21088572.000000
[Thu Jun 13 17:27:15 2013] User source parameters:
  Position = (209.0, 414.6) = 16 47 52.53 -45 45 16.8
  Extent = 23.7 (23.7-47.4)", rotation angle = 0
  Source aperture counts = -219.9 +/- 38.8
  Background aperture counts = 1645.9
  Rate = -0.005 +/- 0.0009

[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 3e-13
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete