[Thu Jun 13 01:06:48 2013] Detection parameters:
  Position = (155.6, 234.0) = 16 48 14.92 -45 58 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.1 +/- 15.1
  Background counts = 29.8
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 11.36'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Thu Jun 13 01:10:47 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 12.11"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src19 appears to have run properly
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jun 13 03:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Warning, spatial fit 19 centroid is now closest to src. 15
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:42 2013] Source is confused with source 15
[Thu Jun 13 07:02:42 2013] Source is confused with source 50
[Thu Jun 13 07:02:58 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Thu Jun 13 07:02:58 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 12.11"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 18 centroid is now closest to src. 15
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(13491.760452, 20310.499619, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (118, 197) - (193, 272)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(13491.760452, 20310.499619, 1087.500000, 2175.000000, X, Y) && !ellipse(15392.004745, 22319.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11750.440903, 23092.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12045.139862, 20154.999863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10963.334000, 19925.154000, 2082.672060, 260.334407, 357.055330, X, Y) && !ellipse(13192.818000, 20149.850000, 1937.208056, 699.453620, 345.770400, X, Y) && !ellipse(14263.000000, 21590.401627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15539.734558, 20736.090195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.938416, 20629.351379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14556.377600, 20168.403000, 1863.832054, 856.776025, 352.445410, X, Y) && !ellipse(15309.579400, 20242.939800, 1820.816052, 789.261623, 359.091115, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20.gif
[Thu Jun 13 15:24:52 2013] Mean detx,y = (-13691.61, 6556.37) 
[Thu Jun 13 15:24:55 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:25:07 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:25:07 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 13 15:25:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jun 13 16:36:09 2013] Not generating rmf since there are only 97 counts
[Thu Jun 13 16:36:09 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:14 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:14 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 433.00
[Thu Jun 13 17:27:14 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 589.00
[Thu Jun 13 17:27:14 2013] Got source and background scale factors 1263578.000000, 1544456.000000
[Thu Jun 13 17:27:14 2013] User source parameters:
  Position = (155.6, 234.0) = 16 48 14.92 -45 58 21.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -48.9 +/- 21.8
  Background aperture counts = 481.9
  Rate = -0.001 +/- 0.0005

[Thu Jun 13 17:27:14 2013] Updating counts from extracted products
[Thu Jun 13 17:27:14 2013] Set source signif. to -48.88/21.95 = -2.23
[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=-0.00118, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updated flux is not positive, keeping original flux
[Thu Jun 13 17:27:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete