[Thu Jun 13 01:06:47 2013] Detection parameters:
  Position = (323.0, 336.1) = 16 47 5.13 -45 51 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1391.8 +/- 51.9
  Background counts = 169.1
  Rate = 0.04 +/- 0.001

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 3.26'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Thu Jun 13 01:10:47 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.06"
[Thu Jun 13 03:39:01 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 13 03:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 03:39:01 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 13 03:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 03:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 13 03:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 13 03:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Warning, spatial fit 2 centroid is now closest to src. 3
[Thu Jun 13 07:02:42 2013] Source 2 is offset by -1.826364 and -6.050804 pixels which is larger than
2 X fitted extent = 2.971784 x 2.383458, not incorporating fit results
[Thu Jun 13 07:02:42 2013] Source 2 is offset by -5.286042 and -2.282563 pixels which is larger than
2 X fitted extent = 4.109600 x 7.760276, not incorporating fit results
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:42 2013] Source is confused with source 6
[Thu Jun 13 07:02:58 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Thu Jun 13 07:02:58 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.06"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 2 centroid is now closest to src. 3
[Thu Jun 13 15:06:58 2013] Source 2 is offset by -5.286042 and -2.431324 pixels which is larger than
2 X fitted extent = 4.006851 x 7.760276, not incorporating fit results
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:07:13 2013] Counts = 1391.790039, rescaling region sizes by 2.000000
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(28048.472321, 29196.422028, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (248, 261) - (398, 411)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(28048.472321, 29196.422028, 4350.000000, 8700.000000, X, Y) && !ellipse(26952.045200, 27647.274400, 470.321614, 411.458412, 2.798452, X, Y) && !ellipse(27308.130676, 29438.361572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.521000, 29633.312600, 695.018420, 625.732018, 101.969100, X, Y) && !ellipse(28598.368713, 28146.426971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27996.039800, 27459.385600, 403.060812, 403.060812, 0.000000, X, Y) && !ellipse(26253.733600, 31634.545000, 387.467211, 387.467211, 0.000000, X, Y) && !ellipse(34090.251678, 32918.404053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28055.496940, 23098.906800, 452.035213, 452.035213, 0.000000, X, Y) && !ellipse(23549.124268, 35796.062866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18130.210000, 36023.981200, 1894.016054, 1894.016054, 0.000000, X, Y) && !ellipse(19547.898209, 34156.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.109619, 31148.681000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.991608, 30369.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.816284, 29447.396637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.202820, 29020.481201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29447.147064, 27388.360352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32152.125427, 26024.769165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.059700, 23822.034400, 476.539214, 290.997608, 136.299000, X, Y) && !ellipse(31091.255371, 23129.515472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34515.059021, 21224.472214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21250.757004, 21102.907715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.653800, 20762.105000, 724.907221, 312.367209, 53.226700, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 15:09:17 2013] Mean detx,y = (1240.65, -1821.41) 
[Thu Jun 13 15:09:25 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:11:30 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:11:31 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 15:11:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 15:45:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 15:45:13 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:11 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:11 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 12799.00
[Thu Jun 13 17:27:11 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 78474.00
[Thu Jun 13 17:27:11 2013] Got source and background scale factors 4391527.000000, 139038634.000000
[Thu Jun 13 17:27:11 2013] User source parameters:
  Position = (323.0, 336.1) = 16 47 5.13 -45 51 0.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 10320.4 +/- 114.1
  Background aperture counts = 2478.6
  Rate = 0.2 +/- 0.003

[Thu Jun 13 17:27:11 2013] Updating counts from extracted products
[Thu Jun 13 17:27:11 2013] Set source signif. to 10320.40/49.79 = 207.30
[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.25, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 1.7e-12
[Thu Jun 13 17:27:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete