[Thu Jun 13 01:06:48 2013] Detection parameters:
  Position = (129.6, 231.1) = 16 48 25.77 -45 58 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 13.9
  Background counts = 24.3
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 01:06:49 2013] Off-axis axis estimate = 13.18'
[Thu Jun 13 01:10:47 2013] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 01:10:47 2013] Initial guess for spatial extent in simple fitting = 13.02"
[Thu Jun 13 01:10:47 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Thu Jun 13 01:10:47 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 13.02"
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 13 03:39:02 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 13 03:39:02 2013] Fit fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_src12 appears to have run properly
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 13 03:39:03 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 13 03:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 13 03:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:42 2013] Spatial fit model total counts = 526.137000, observed total counts = 526.000000
[Thu Jun 13 07:02:42 2013] Offset between fit and detection position for source 13 = 3.410268 pixels
[Thu Jun 13 07:02:42 2013] 541.494600 total counts/ 462.092000 bgd. counts: snr = 3.693776
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.410268 pixels
  Position = (126.6, 229.6) = 16 48 27.06 -45 58 40.7
  Extent = 26.0 (19.4-52.1)", rotation angle = 357 (353-0) degrees
  Source counts = 79.4 +/- 23.3
  Background counts = 462.1
  Rate = 0.002 +/- 0.0006
[Thu Jun 13 07:02:42 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:42 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:42 2013] Source does appear to be extended
[Thu Jun 13 07:02:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.76
[Thu Jun 13 07:02:42 2013] Source is asymmetric
[Thu Jun 13 07:02:42 2013] Source is confused with source 12
[Thu Jun 13 07:02:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:02:58 2013] Initial guess for spatial extent in simple fitting = 14.64"
[Thu Jun 13 07:02:58 2013] source mask rpix=3.4, npix_max = 59, mask sum = 36, frac = 0.602
[Thu Jun 13 07:02:58 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 14.64"
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12.csv
[Thu Jun 13 09:02:24 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jun 13 09:02:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12.csv
[Thu Jun 13 09:02:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 13 09:02:25 2013] fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jun 13 09:02:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 13 09:02:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:58 2013] Warning, spatial fit 12 centroid is now closest to src. 21
[Thu Jun 13 15:06:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:06:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:06:58 2013] Source does appear to be extended
[Thu Jun 13 15:06:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.76
[Thu Jun 13 15:06:58 2013] Source is asymmetric
[Thu Jun 13 15:07:13 2013] XMMSAS src. selection expression = ellipse(10963.334000, 19925.154000, 1562.004045, 195.250806, 357.055330, X, Y)
[Thu Jun 13 15:07:13 2013] Writing source region out to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 13 15:07:13 2013] Extracting stamp from image fullrun_pn_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (37, 140) - (216, 319)
[Thu Jun 13 15:07:13 2013] XMMSAS bgd. selection expression = annulus(10963.334000, 19925.154000, 2603.340075, 5206.680150, X, Y) && !ellipse(15392.004745, 22319.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11750.440903, 23092.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12045.139862, 20154.999863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13192.818000, 20149.850000, 1937.208056, 699.453620, 345.770400, X, Y) && !ellipse(14263.000000, 21590.401627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13491.760452, 20310.499619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9701.165833, 20212.035202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9587.654701, 22217.161118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15539.734558, 20736.090195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.938416, 20629.351379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14556.377600, 20168.403000, 1863.832054, 856.776025, 352.445410, X, Y) && !ellipse(15309.579400, 20242.939800, 1820.816052, 789.261623, 359.091115, X, Y)
[Thu Jun 13 15:07:13 2013] Writing fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13.gif
[Thu Jun 13 15:19:47 2013] Mean detx,y = (-16397.48, 6875.87) 
[Thu Jun 13 15:19:51 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 15:20:21 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 15:20:21 2013] Setting source spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 13 15:20:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 13 16:30:30 2013] Not generating rmf since there are only 79 counts
[Thu Jun 13 16:30:30 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:13 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:13 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 254.00
[Thu Jun 13 17:27:13 2013] Total counts from fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 3954.00
[Thu Jun 13 17:27:13 2013] Got source and background scale factors 936000.000000, 11171713.000000
[Thu Jun 13 17:27:13 2013] User source parameters:
  Position = (126.6, 229.6) = 16 48 27.06 -45 58 40.7
  Extent = 26.0 (19.4-52.1)", rotation angle = 357 (353-0) degrees
  Source aperture counts = -77.3 +/- 17.0
  Background aperture counts = 331.3
  Rate = -0.002 +/- 0.0004

[Thu Jun 13 17:27:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:19 2013] Using photon index=1.80, rate=0.00192, arf fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13.arf
[Thu Jun 13 17:27:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:19 2013] Updating source flux to 5.2e-14
[Thu Jun 13 17:27:30 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Thu Jun 13 17:27:30 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:27:36 2013] xmm0604380101/analysis//spectral/fullrun_pn_xmm0604380101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete