[Thu Jun 13 01:07:31 2013] Detection parameters:
  Position = (430.2, 468.8) = 16 46 20.63 -45 41 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2555.8 +/- 64.4
  Background counts = 42.3
  Rate = 0.06 +/- 0.001

[Thu Jun 13 01:07:31 2013] Off-axis axis estimate = 15.62'
[Thu Jun 13 04:06:12 2013] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 04:06:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 04:06:12 2013] Initial guess for spatial extent in simple fitting = 14.24"
[Thu Jun 13 04:06:12 2013] source mask rpix=3.3, npix_max = 56, mask sum = 58, frac = 1.019
[Thu Jun 13 04:06:12 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 14.24"
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:49 2013] Warning, spatial fit 3 centroid is now closest to src. 11
[Thu Jun 13 07:02:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:49 2013] Assessing source extent using major
[Thu Jun 13 07:02:49 2013] Source does appear to be extended
[Thu Jun 13 07:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:49 2013] Source is confused with source 1
[Thu Jun 13 09:33:04 2013] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:33:04 2013] Initial guess for spatial extent in simple fitting = 14.24"
[Thu Jun 13 09:33:04 2013] source mask rpix=3.3, npix_max = 56, mask sum = 58, frac = 1.019
[Thu Jun 13 09:33:04 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 14.24"
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:04 2013] Spatial fit model total counts = 8485.500000, observed total counts = 7598.000000
[Thu Jun 13 15:07:04 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 15:07:04 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Thu Jun 13 15:07:04 2013] Source 7 is offset by 2.092361 and 0.950095 pixels which is larger than
2 X fitted extent = 1.661706 x 1.661706, not incorporating fit results
[Thu Jun 13 15:07:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:04 2013] Assessing source extent using major
[Thu Jun 13 15:07:04 2013] Source does appear to be extended
[Thu Jun 13 15:07:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:10 2013] Counts = 2555.753174, rescaling region sizes by 2.000000
[Thu Jun 13 17:06:10 2013] XMMSAS src. selection expression = ellipse(37379.737396, 40739.844238, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing source region out to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_src.reg
[Thu Jun 13 17:06:10 2013] Extracting stamp from image fullrun_mos2_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (355, 394) - (505, 544)
[Thu Jun 13 17:06:10 2013] XMMSAS bgd. selection expression = annulus(37379.737396, 40739.844238, 4350.000000, 8700.000000, X, Y) && !ellipse(37246.254800, 40348.960000, 1949.056056, 442.828813, 92.308050, X, Y) && !ellipse(39684.167419, 38589.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38961.996796, 38583.562195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38346.250366, 39430.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34117.768402, 32941.208099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.737946, 41743.049713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.167603, 40310.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35776.455475, 41289.560089, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7.gif
[Thu Jun 13 17:10:10 2013] Mean detx,y = (-10515.72, 12451.43) 
[Thu Jun 13 17:10:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:11:16 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:11:16 2013] Setting source spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 13 17:11:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jun 13 17:22:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:22:27 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:22 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:22 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 6609.00
[Thu Jun 13 17:27:22 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 15778.00
[Thu Jun 13 17:27:22 2013] Got source and background scale factors 3157656.000000, 66795421.000000
[Thu Jun 13 17:27:22 2013] User source parameters:
  Position = (430.2, 468.8) = 16 46 20.63 -45 41 21.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5863.1 +/- 82.3
  Background aperture counts = 745.9
  Rate = 0.1 +/- 0.002

[Thu Jun 13 17:27:22 2013] Updating counts from extracted products
[Thu Jun 13 17:27:22 2013] Set source signif. to 5863.12/27.31 = 214.68
[Thu Jun 13 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:24 2013] Using photon index=1.80, rate=0.135, arf fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7.arf
[Thu Jun 13 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:24 2013] Updating source flux to 9.5e-12
[Thu Jun 13 17:27:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:30 2013] xmm0604380101/analysis//spectral/fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete