[Thu Jun 13 01:07:31 2013] Detection parameters:
  Position = (441.3, 453.8) = 16 46 16.00 -45 42 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 709.1 +/- 34.7
  Background counts = 48.6
  Rate = 0.02 +/- 0.0008

[Thu Jun 13 01:07:31 2013] Off-axis axis estimate = 15.30'
[Thu Jun 13 04:06:12 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 04:06:12 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Jun 13 04:06:12 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Thu Jun 13 04:06:12 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 14.08"
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:49 2013] Spatial fit model total counts = 3238.340000, observed total counts = 2874.000000
[Thu Jun 13 07:02:49 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 07:02:49 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Thu Jun 13 07:02:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:49 2013] Assessing source extent using major
[Thu Jun 13 07:02:49 2013] Source does appear to be extended
[Thu Jun 13 07:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:49 2013] Source is confused with source 1
[Thu Jun 13 09:33:04 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:33:04 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Jun 13 09:33:04 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Thu Jun 13 09:33:04 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 14.08"
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:04 2013] Source 2 is offset by -7.712410 and -4.301815 pixels which is larger than
2 X fitted extent = 1.972497 x 1.972497, not incorporating fit results
[Thu Jun 13 15:07:04 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Thu Jun 13 15:07:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:04 2013] Assessing source extent using major
[Thu Jun 13 15:07:04 2013] Source does appear to be extended
[Thu Jun 13 15:07:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:10 2013] XMMSAS src. selection expression = ellipse(38346.250366, 39430.320068, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing source region out to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 17:06:10 2013] Extracting stamp from image fullrun_mos2_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (404, 416) - (479, 491)
[Thu Jun 13 17:06:10 2013] XMMSAS bgd. selection expression = annulus(38346.250366, 39430.320068, 1087.500000, 2175.000000, X, Y) && !ellipse(37246.254800, 40348.960000, 1949.056056, 442.828813, 92.308050, X, Y) && !ellipse(37379.737396, 40739.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.167419, 38589.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38961.996796, 38583.562195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.737946, 41743.049713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.167603, 40310.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35776.455475, 41289.560089, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 17:12:36 2013] Mean detx,y = (-11580.75, 11540.71) 
[Thu Jun 13 17:12:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:12:43 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:12:43 2013] Setting source spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 17:12:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 17:23:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:23:08 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:23 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:23 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1094.00
[Thu Jun 13 17:27:23 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1108.00
[Thu Jun 13 17:27:23 2013] Got source and background scale factors 1283770.000000, 3105519.000000
[Thu Jun 13 17:27:23 2013] User source parameters:
  Position = (441.3, 453.8) = 16 46 16.00 -45 42 26.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 636.0 +/- 34.1
  Background aperture counts = 458.0
  Rate = 0.01 +/- 0.0008

[Thu Jun 13 17:27:23 2013] Updating counts from extracted products
[Thu Jun 13 17:27:23 2013] Set source signif. to 635.97/21.40 = 29.72
[Thu Jun 13 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:24 2013] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:24 2013] Updating source flux to 8.8e-13
[Thu Jun 13 17:27:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:30 2013] xmm0604380101/analysis//spectral/fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete