[Thu Jun 13 01:07:31 2013] Detection parameters:
  Position = (309.1, 310.3) = 16 47 10.88 -45 52 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.0 +/- 15.1
  Background counts = 37.5
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:07:31 2013] Off-axis axis estimate = 1.16'
[Thu Jun 13 04:06:12 2013] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 04:06:12 2013] Initial guess for spatial extent in simple fitting = 7.01"
[Thu Jun 13 04:06:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Thu Jun 13 04:06:12 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.01"
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun 13 07:02:29 2013] Fit fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src14 appears to have run properly
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun 13 07:02:29 2013] Fit fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Jun 13 07:02:49 2013] Source 17 is offset by -1.214757 and -7.180422 pixels which is larger than
2 X fitted extent = 2.559481 x 1.369412, not incorporating fit results
[Thu Jun 13 07:02:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:49 2013] Assessing source extent using major
[Thu Jun 13 07:02:49 2013] Source does appear to be extended
[Thu Jun 13 07:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 09:33:04 2013] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:33:04 2013] Initial guess for spatial extent in simple fitting = 7.01"
[Thu Jun 13 09:33:04 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Thu Jun 13 09:33:04 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.01"
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:04 2013] Source 17 is offset by 6.541631 and 1.710175 pixels which is larger than
2 X fitted extent = 6.442897 x 6.442897, not incorporating fit results
[Thu Jun 13 15:07:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:04 2013] Assessing source extent using major
[Thu Jun 13 15:07:04 2013] Source does appear to be extended
[Thu Jun 13 15:07:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:10 2013] XMMSAS src. selection expression = ellipse(26846.229919, 26944.333252, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing source region out to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jun 13 17:06:10 2013] Extracting stamp from image fullrun_mos2_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (272, 273) - (347, 348)
[Thu Jun 13 17:06:10 2013] XMMSAS bgd. selection expression = annulus(26846.229919, 26944.333252, 1087.500000, 2175.000000, X, Y) && !ellipse(26946.401800, 27645.464600, 432.396812, 376.927211, 348.639300, X, Y) && !ellipse(27268.987579, 28325.628174, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17.gif
[Thu Jun 13 17:14:33 2013] Mean detx,y = (163.91, -327.76) 
[Thu Jun 13 17:14:34 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:14:52 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:14:52 2013] Setting source spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 13 17:14:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jun 13 17:25:53 2013] Not generating rmf since there are only 78 counts
[Thu Jun 13 17:25:53 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:24 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:24 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1032.00
[Thu Jun 13 17:27:24 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 427.00
[Thu Jun 13 17:27:24 2013] Got source and background scale factors 1200336.000000, 318275.000000
[Thu Jun 13 17:27:24 2013] User source parameters:
  Position = (309.1, 310.3) = 16 47 10.88 -45 52 57.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -578.4 +/- 33.1
  Background aperture counts = 1610.4
  Rate = -0.01 +/- 0.0008

[Thu Jun 13 17:27:24 2013] Updating counts from extracted products
[Thu Jun 13 17:27:24 2013] Set source signif. to -578.38/40.13 = -14.41
[Thu Jun 13 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:24 2013] Using photon index=1.80, rate=-0.0134, arf fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17.arf
[Thu Jun 13 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:24 2013] Updated flux is not positive, keeping original flux
[Thu Jun 13 17:27:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:30 2013] xmm0604380101/analysis//spectral/fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete