[Thu Jun 13 01:07:31 2013] Detection parameters:
  Position = (415.3, 480.4) = 16 46 26.83 -45 40 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.3 +/- 16.1
  Background counts = 38.3
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:07:31 2013] Off-axis axis estimate = 15.68'
[Thu Jun 13 04:06:12 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 04:06:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 04:06:12 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Thu Jun 13 04:06:12 2013] source mask rpix=3.3, npix_max = 57, mask sum = 41, frac = 0.717
[Thu Jun 13 04:06:12 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 14.27"
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:49 2013] Warning, spatial fit 15 centroid is now closest to src. 11
[Thu Jun 13 07:02:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:49 2013] Assessing source extent using major
[Thu Jun 13 07:02:49 2013] Source does appear to be extended
[Thu Jun 13 07:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:49 2013] Source is confused with source 18
[Thu Jun 13 09:33:04 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:33:04 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Thu Jun 13 09:33:04 2013] source mask rpix=3.3, npix_max = 57, mask sum = 41, frac = 0.717
[Thu Jun 13 09:33:04 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 14.27"
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:04 2013] Warning, spatial fit 14 centroid is now closest to src. 7
[Thu Jun 13 15:07:04 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.557673 pixels away
[Thu Jun 13 15:07:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:04 2013] Assessing source extent using major
[Thu Jun 13 15:07:04 2013] Source does appear to be extended
[Thu Jun 13 15:07:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:10 2013] XMMSAS src. selection expression = ellipse(36083.737946, 41743.049713, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing source region out to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 13 17:06:10 2013] Extracting stamp from image fullrun_mos2_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (378, 443) - (453, 518)
[Thu Jun 13 17:06:10 2013] XMMSAS bgd. selection expression = annulus(36083.737946, 41743.049713, 1087.500000, 2175.000000, X, Y) && !ellipse(37246.254800, 40348.960000, 1949.056056, 442.828813, 92.308050, X, Y) && !ellipse(37379.737396, 40739.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38346.250366, 39430.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.167603, 40310.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35776.455475, 41289.560089, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10.gif
[Thu Jun 13 17:14:55 2013] Mean detx,y = (-9307.62, 13720.70) 
[Thu Jun 13 17:14:56 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:15:07 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:15:07 2013] Setting source spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 13 17:15:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 13 17:26:03 2013] Not generating rmf since there are only 86 counts
[Thu Jun 13 17:26:03 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:24 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:24 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 350.00
[Thu Jun 13 17:27:24 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 794.00
[Thu Jun 13 17:27:24 2013] Got source and background scale factors 773342.000000, 2196490.000000
[Thu Jun 13 17:27:24 2013] User source parameters:
  Position = (415.3, 480.4) = 16 46 26.83 -45 40 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 70.4 +/- 19.7
  Background aperture counts = 279.6
  Rate = 0.002 +/- 0.0005

[Thu Jun 13 17:27:24 2013] Updating counts from extracted products
[Thu Jun 13 17:27:24 2013] Set source signif. to 70.45/16.72 = 4.21
[Thu Jun 13 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:24 2013] Using photon index=1.80, rate=0.00163, arf fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10.arf
[Thu Jun 13 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:24 2013] Updating source flux to 1.7e-13
[Thu Jun 13 17:27:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:30 2013] xmm0604380101/analysis//spectral/fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete