[Thu Jun 13 01:07:31 2013] Detection parameters:
  Position = (429.9, 460.1) = 16 46 20.74 -45 41 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3453.7 +/- 74.5
  Background counts = 47.8
  Rate = 0.08 +/- 0.002

[Thu Jun 13 01:07:31 2013] Off-axis axis estimate = 15.11'
[Thu Jun 13 04:06:12 2013] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 04:06:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 04:06:12 2013] Initial guess for spatial extent in simple fitting = 13.98"
[Thu Jun 13 04:06:12 2013] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.160
[Thu Jun 13 04:06:12 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.98"
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 07:02:29 2013] Fit fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 07:02:29 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 07:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 07:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:49 2013] Spatial fit model total counts = 7811.690000, observed total counts = 7342.000000
[Thu Jun 13 07:02:49 2013] Offset between fit and detection position for source 1 = 4.424283 pixels
[Thu Jun 13 07:02:49 2013] 7835.750000 total counts/ 3020.930000 bgd. counts: snr = 87.601133
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.424283 pixels
  Position = (428.7, 464.3) = 16 46 21.27 -45 41 40.1
  Extent = 24.4 (23.7-25.2)" x 5.5 (5.4-5.7)", rotation angle = 92 (92-93) degrees
  Source counts = 4814.8 +/- 88.5
  Background counts = 3020.9
  Rate = 0.1 +/- 0.002
[Thu Jun 13 07:02:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:49 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:02:49 2013] Source does appear to be extended
[Thu Jun 13 07:02:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.18
[Thu Jun 13 07:02:49 2013] Source is asymmetric
[Thu Jun 13 07:02:49 2013] Source is confused with source 7
[Thu Jun 13 07:02:49 2013] Source is confused with source 2
[Thu Jun 13 09:33:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:33:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 09:33:04 2013] Initial guess for spatial extent in simple fitting = 14.95"
[Thu Jun 13 09:33:04 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.032
[Thu Jun 13 09:33:04 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.95"
[Thu Jun 13 15:06:47 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 13 15:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 15:06:47 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 13 15:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 15:06:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 15:06:48 2013] fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 13 15:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 15:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:04 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Thu Jun 13 15:07:04 2013] Spatial fit model total counts = 5922.620000, observed total counts = 4874.000000
[Thu Jun 13 15:07:04 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 15:07:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:04 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 15:07:04 2013] Source does appear to be extended
[Thu Jun 13 15:07:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.18
[Thu Jun 13 15:07:04 2013] Source is asymmetric
[Thu Jun 13 17:06:10 2013] Counts = 4814.820000, rescaling region sizes by 2.000000
[Thu Jun 13 17:06:10 2013] XMMSAS src. selection expression = ellipse(37246.254800, 40348.960000, 2923.584084, 664.243219, 92.308050, X, Y)
[Thu Jun 13 17:06:10 2013] Writing source region out to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 13 17:06:10 2013] Extracting stamp from image fullrun_mos2_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (261, 296) - (595, 595)
[Thu Jun 13 17:06:10 2013] XMMSAS bgd. selection expression = annulus(37246.254800, 40348.960000, 9745.280280, 19490.560561, X, Y) && !ellipse(26946.401800, 27645.464600, 432.396812, 376.927211, 348.639300, X, Y) && !ellipse(37379.737396, 40739.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.167419, 38589.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38961.996796, 38583.562195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38346.250366, 39430.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34117.768402, 32941.208099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.987579, 28325.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42537.389652, 23159.855000, 817.568024, 269.188808, 95.773108, X, Y) && !ellipse(26846.229919, 26944.333252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.737946, 41743.049713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.167603, 40310.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35776.455475, 41289.560089, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:06:10 2013] Writing fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 13 17:06:18 2013] Mean detx,y = (-10532.39, 12277.03) 
[Thu Jun 13 17:06:20 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:09:47 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:09:47 2013] Setting source spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 13 17:09:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 17:27:22 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:22 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 6758.00
[Thu Jun 13 17:27:22 2013] Total counts from fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 38262.00
[Thu Jun 13 17:27:22 2013] Got source and background scale factors 3963762.000000, 186170040.000000
[Thu Jun 13 17:27:22 2013] User source parameters:
  Position = (428.7, 464.3) = 16 46 21.27 -45 41 40.1
  Extent = 24.4 (23.7-25.2)" x 5.5 (5.4-5.7)", rotation angle = 92 (92-93) degrees
  Source aperture counts = 5943.4 +/- 83.2
  Background aperture counts = 814.6
  Rate = 0.1 +/- 0.002

[Thu Jun 13 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:24 2013] Using photon index=1.80, rate=0.111, arf fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:24 2013] Updating source flux to 6.2e-12
[Thu Jun 13 17:27:28 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:27:28 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:27:30 2013] xmm0604380101/analysis//spectral/fullrun_mos2_xmm0604380101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete