[Thu Jun 13 01:07:09 2013] Detection parameters:
  Position = (153.6, 414.9) = 16 48 15.55 -45 45 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.4 +/- 15.2
  Background counts = 25.1
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:07:10 2013] Off-axis axis estimate = 13.47'
[Thu Jun 13 03:39:03 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 03:39:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 03:39:03 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Thu Jun 13 03:39:03 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Thu Jun 13 03:39:03 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.17"
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 04:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 04:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:45 2013] Warning, spatial fit 5 centroid is now closest to src. 7
[Thu Jun 13 07:02:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:45 2013] Assessing source extent using major
[Thu Jun 13 07:02:45 2013] Source does appear to be extended
[Thu Jun 13 07:02:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 09:02:26 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:02:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 09:02:26 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Thu Jun 13 09:02:26 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Thu Jun 13 09:02:26 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.17"
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 13 09:33:04 2013] Fit fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 13 09:33:04 2013] Fit fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 13 15:07:01 2013] Warning, spatial fit 5 centroid is now closest to src. 7
[Thu Jun 13 15:07:01 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 26.923163 pixels away
[Thu Jun 13 15:07:01 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:01 2013] Assessing source extent using major
[Thu Jun 13 15:07:01 2013] Source does appear to be extended
[Thu Jun 13 15:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:52:12 2013] XMMSAS src. selection expression = ellipse(13312.522079, 36044.106323, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:52:12 2013] Writing source region out to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 16:52:12 2013] Extracting stamp from image fullrun_mos1_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (116, 377) - (191, 452)
[Thu Jun 13 16:52:12 2013] XMMSAS bgd. selection expression = annulus(13312.522079, 36044.106323, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 16:52:12 2013] Writing fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 16:53:30 2013] Mean detx,y = (9154.25, -13624.74) 
[Thu Jun 13 16:53:31 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:53:43 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:53:43 2013] Setting source spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 16:53:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 17:05:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:05:06 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:20 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:20 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 282.00
[Thu Jun 13 17:27:20 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 981.00
[Thu Jun 13 17:27:20 2013] Got source and background scale factors 1330380.000000, 7109971.000000
[Thu Jun 13 17:27:20 2013] User source parameters:
  Position = (153.6, 414.9) = 16 48 15.55 -45 45 15.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.4 +/- 17.8
  Background aperture counts = 183.6
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 17:27:20 2013] Updating counts from extracted products
[Thu Jun 13 17:27:20 2013] Set source signif. to 98.44/13.55 = 7.27
[Thu Jun 13 17:27:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:22 2013] Using photon index=1.80, rate=0.00227, arf fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:27:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:22 2013] Updating source flux to 1.5e-13
[Thu Jun 13 17:27:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:28 2013] xmm0604380101/analysis//spectral/fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete