[Thu Jun 13 01:07:10 2013] Detection parameters:
  Position = (319.0, 323.9) = 16 47 6.78 -45 51 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.1 +/- 18.7
  Background counts = 54.9
  Rate = 0.003 +/- 0.0005

[Thu Jun 13 01:07:10 2013] Off-axis axis estimate = 2.37'
[Thu Jun 13 03:39:03 2013] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 03:39:03 2013] Initial guess for spatial extent in simple fitting = 7.62"
[Thu Jun 13 03:39:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Thu Jun 13 03:39:03 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.62"
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 04:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 04:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:45 2013] Source 12 is offset by 6.989314 and 5.632708 pixels which is larger than
2 X fitted extent = 2.366225 x 2.366225, not incorporating fit results
[Thu Jun 13 07:02:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:45 2013] Assessing source extent using major
[Thu Jun 13 07:02:45 2013] Source does appear to be extended
[Thu Jun 13 07:02:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:02:45 2013] Source is confused with source 14
[Thu Jun 13 09:02:26 2013] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:02:26 2013] Initial guess for spatial extent in simple fitting = 7.62"
[Thu Jun 13 09:02:26 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Thu Jun 13 09:02:26 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.62"
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 09:33:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 09:33:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:01 2013] Spatial fit model total counts = 1308.740000, observed total counts = 1092.000000
[Thu Jun 13 15:07:01 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 15:07:01 2013] Source 12 is offset by 6.989314 and 5.619559 pixels which is larger than
2 X fitted extent = 2.342175 x 2.342175, not incorporating fit results
[Thu Jun 13 15:07:01 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:01 2013] Assessing source extent using major
[Thu Jun 13 15:07:01 2013] Source does appear to be extended
[Thu Jun 13 15:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:52:11 2013] XMMSAS src. selection expression = ellipse(27703.358337, 28132.129639, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:52:11 2013] Writing source region out to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 13 16:52:11 2013] Extracting stamp from image fullrun_mos1_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (281, 286) - (356, 361)
[Thu Jun 13 16:52:12 2013] XMMSAS bgd. selection expression = annulus(27703.358337, 28132.129639, 1087.500000, 2175.000000, X, Y) && !ellipse(26953.059200, 27641.879400, 427.740012, 393.644011, 3.806270, X, Y) && !ellipse(28006.777740, 27611.717346, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:52:12 2013] Writing fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12.gif
[Thu Jun 13 16:53:13 2013] Mean detx,y = (634.42, 442.69) 
[Thu Jun 13 16:53:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:53:27 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:53:27 2013] Setting source spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 13 16:53:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 13 17:03:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:03:11 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:20 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:20 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 951.00
[Thu Jun 13 17:27:20 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 844.00
[Thu Jun 13 17:27:20 2013] Got source and background scale factors 1173446.000000, 1603158.000000
[Thu Jun 13 17:27:20 2013] User source parameters:
  Position = (319.0, 323.9) = 16 47 6.78 -45 51 51.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 333.2 +/- 31.9
  Background aperture counts = 617.8
  Rate = 0.008 +/- 0.0007

[Thu Jun 13 17:27:20 2013] Updating counts from extracted products
[Thu Jun 13 17:27:20 2013] Set source signif. to 333.23/24.86 = 13.41
[Thu Jun 13 17:27:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:22 2013] Using photon index=1.80, rate=0.0077, arf fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12.arf
[Thu Jun 13 17:27:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:22 2013] Updating source flux to 1.5e-13
[Thu Jun 13 17:27:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:28 2013] xmm0604380101/analysis//spectral/fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete