[Thu Jun 13 01:07:10 2013] Detection parameters:
  Position = (115.2, 354.0) = 16 48 31.59 -45 49 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.2 +/- 10.3
  Background counts = 19.4
  Rate = 0.001 +/- 0.0002

[Thu Jun 13 01:07:10 2013] Off-axis axis estimate = 13.88'
[Thu Jun 13 03:39:03 2013] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 03:39:03 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Thu Jun 13 03:39:03 2013] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.940
[Thu Jun 13 03:39:03 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.37"
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 04:06:11 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 13 04:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 04:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 04:06:12 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 13 04:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 04:06:12 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 13 04:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 04:06:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:02:45 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.494594 pixels away
[Thu Jun 13 07:02:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:02:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:02:45 2013] Assessing source extent using major
[Thu Jun 13 07:02:45 2013] Source does appear to be extended
[Thu Jun 13 07:02:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 09:02:26 2013] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:02:26 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Thu Jun 13 09:02:26 2013] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.940
[Thu Jun 13 09:02:26 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 13.37"
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15.csv
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15.csv
[Thu Jun 13 09:33:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jun 13 09:33:04 2013] fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 13 09:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jun 13 09:33:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604380101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:07:01 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.251005 pixels away
[Thu Jun 13 15:07:01 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 15:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 15:07:01 2013] Assessing source extent using major
[Thu Jun 13 15:07:01 2013] Source does appear to be extended
[Thu Jun 13 15:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:52:12 2013] XMMSAS src. selection expression = ellipse(9975.051353, 30750.108002, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:52:12 2013] Writing source region out to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 13 16:52:12 2013] Extracting stamp from image fullrun_mos1_xmm0604380101_pi300-10000_cl_sm2.00.img.gz, (78, 317) - (153, 392)
[Thu Jun 13 16:52:12 2013] XMMSAS bgd. selection expression = annulus(9975.051353, 30750.108002, 1087.500000, 2175.000000, X, Y) && !ellipse(11698.827133, 27896.267456, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:52:12 2013] Writing fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 13 16:56:02 2013] Mean detx,y = (3968.27, -16989.61) 
[Thu Jun 13 16:56:03 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:56:19 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:56:19 2013] Setting source spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 13 16:56:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 13 17:05:59 2013] Not generating rmf since there are only 43 counts
[Thu Jun 13 17:05:59 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:27:21 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:27:21 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 129.00
[Thu Jun 13 17:27:21 2013] Total counts from fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 632.00
[Thu Jun 13 17:27:21 2013] Got source and background scale factors 946806.000000, 5328793.000000
[Thu Jun 13 17:27:21 2013] User source parameters:
  Position = (115.2, 354.0) = 16 48 31.59 -45 49 40.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 16.7 +/- 12.4
  Background aperture counts = 112.3
  Rate = 0.0004 +/- 0.0003

[Thu Jun 13 17:27:21 2013] Updating counts from extracted products
[Thu Jun 13 17:27:21 2013] Set source signif. to 16.71/10.60 = 1.58
[Thu Jun 13 17:27:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:27:22 2013] Using photon index=1.80, rate=0.000386, arf fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 13 17:27:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:27:22 2013] Updating source flux to 3.6e-14
[Thu Jun 13 17:27:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:27:28 2013] xmm0604380101/analysis//spectral/fullrun_mos1_xmm0604380101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete