[Wed Jun  6 00:34:52 2012] Detection parameters:
  Position = (124.6, 226.1) = 12 8 59.98 -27 38 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.3 +/- 22.4
  Background counts = 105.8
  Rate = 0.004 +/- 0.0007

[Wed Jun  6 00:34:52 2012] Off-axis axis estimate = 13.65'
[Wed Jun  6 00:38:03 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 00:38:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 00:38:03 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Wed Jun  6 00:38:03 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Wed Jun  6 00:38:03 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.25"
[Wed Jun  6 01:07:26 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun  6 01:07:26 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun  6 01:07:26 2012] Fit fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed Jun  6 01:07:27 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun  6 01:07:27 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun  6 01:07:27 2012] Fit fullrun_pn_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jun  6 01:44:25 2012] Spatial fit model total counts = 1117.430000, observed total counts = 1065.000000
[Wed Jun  6 01:44:25 2012] Offset between fit and detection position for source 4 = 1.303494 pixels
[Wed Jun  6 01:44:25 2012] 1125.637000 total counts/ 988.784000 bgd. counts: snr = 4.352148
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.303494 pixels
  Position = (123.7, 227.0) = 12 9 0.27 -27 37 58.8
  Extent = 17.4 (8.2-17.4)", rotation angle = 0
  Source counts = 136.9 +/- 33.6
  Background counts = 988.8
  Rate = 0.007 +/- 0.002
[Wed Jun  6 01:44:25 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 01:44:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 01:44:25 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 01:44:25 2012] Source does appear to be extended
[Wed Jun  6 01:44:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 01:44:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  6 01:44:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 01:44:38 2012] Initial guess for spatial extent in simple fitting = 17.37"
[Wed Jun  6 01:44:38 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.003
[Wed Jun  6 01:44:38 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 17.37"
[Wed Jun  6 02:08:58 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun  6 02:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4.csv
[Wed Jun  6 02:08:58 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun  6 02:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4.csv
[Wed Jun  6 02:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 02:08:59 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun  6 02:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun  6 02:08:59 2012] fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun  6 02:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun  6 02:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 02:38:08 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Wed Jun  6 02:38:08 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 02:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 02:38:08 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 02:38:08 2012] Source does appear to be extended
[Wed Jun  6 02:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 02:38:17 2012] XMMSAS src. selection expression = ellipse(10716.532800, 19702.492800, 1042.314030, 1042.314030, 0.000000, X, Y)
[Wed Jun  6 02:38:17 2012] Writing source region out to fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun  6 02:38:17 2012] Extracting stamp from image fullrun_pn_xmm0604310301_pi300-10000_cl_sm2.00.img.gz, (64, 167) - (184, 287)
[Wed Jun  6 02:38:17 2012] XMMSAS bgd. selection expression = annulus(10716.532800, 19702.492800, 1737.190050, 3474.380100, X, Y)
[Wed Jun  6 02:38:17 2012] Writing fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4.gif
[Wed Jun  6 02:40:29 2012] Mean detx,y = (-17341.24, 2616.53) 
[Wed Jun  6 02:40:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 02:40:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 02:40:58 2012] Setting source spectrum file to fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun  6 02:40:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun  6 03:14:20 2012] Updating aperture counts using extracted products
[Wed Jun  6 03:14:20 2012] Error reading totcts from fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun  6 03:14:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 03:14:20 2012] Using photon index=1.80, rate=0.0065, arf fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4.arf
[Wed Jun  6 03:14:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 03:14:20 2012] Updating source flux to 5.2e-14
[Wed Jun  6 03:14:44 2012] xmm0604310301/analysis//spectral/fullrun_pn_xmm0604310301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete