[Wed Jun  6 00:35:31 2012] Detection parameters:
  Position = (304.6, 320.2) = 12 8 1.05 -27 31 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 329.6 +/- 22.8
  Background counts = 25.5
  Rate = 0.01 +/- 0.0007

[Wed Jun  6 00:35:31 2012] Off-axis axis estimate = 1.64'
[Wed Jun  6 01:26:30 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 01:26:30 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jun  6 01:26:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Wed Jun  6 01:26:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Jun  6 01:44:19 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun  6 01:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 01:44:19 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun  6 01:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 01:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 01:44:20 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun  6 01:44:20 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun  6 01:44:20 2012] Fit fullrun_mos2_xmm0604310301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun  6 01:44:30 2012] Spatial fit model total counts = 582.535000, observed total counts = 561.000000
[Wed Jun  6 01:44:30 2012] Offset between fit and detection position for source 2 = 0.235567 pixels
[Wed Jun  6 01:44:30 2012] 587.065000 total counts/ 384.802000 bgd. counts: snr = 10.310929
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.235567 pixels
  Position = (304.4, 320.3) = 12 8 1.12 -27 31 13.6
  Extent = 4.5 (3.8-5.2)", rotation angle = 0
  Source counts = 202.3 +/- 24.2
  Background counts = 384.8
  Rate = 0.006 +/- 0.0007
[Wed Jun  6 01:44:30 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 01:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 01:44:30 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 01:44:30 2012] Source does appear to be extended
[Wed Jun  6 01:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 02:24:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  6 02:24:12 2012] Initial guess for spatial extent in simple fitting = 4.49"
[Wed Jun  6 02:24:12 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.958
[Wed Jun  6 02:24:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.49"
[Wed Jun  6 02:38:04 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun  6 02:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1.csv
[Wed Jun  6 02:38:04 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun  6 02:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1.csv
[Wed Jun  6 02:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 02:38:04 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun  6 02:38:04 2012] fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun  6 02:38:04 2012] Fit fullrun_mos2_xmm0604310301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun  6 02:38:11 2012] Spatial fit model total counts = 583.385000, observed total counts = 561.000000
[Wed Jun  6 02:38:11 2012] Offset between fit and detection position for source 2 = 0.000684 pixels
[Wed Jun  6 02:38:11 2012] 587.952000 total counts/ 385.568000 bgd. counts: snr = 10.306844
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000684 pixels
  Position = (304.4, 320.3) = 12 8 1.12 -27 31 13.6
  Extent = 4.5 (3.8-5.2)", rotation angle = 0
  Source counts = 202.4 +/- 24.2
  Background counts = 385.6
  Rate = 0.006 +/- 0.0007
[Wed Jun  6 02:38:11 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 02:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 02:38:11 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 02:38:11 2012] Source does appear to be extended
[Wed Jun  6 02:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 03:05:23 2012] XMMSAS src. selection expression = ellipse(26438.283400, 27820.976200, 268.331408, 268.331408, 0.000000, X, Y)
[Wed Jun  6 03:05:23 2012] Writing source region out to fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun  6 03:05:23 2012] Extracting stamp from image fullrun_mos2_xmm0604310301_pi300-10000_cl_sm2.00.img.gz, (289, 305) - (320, 336)
[Wed Jun  6 03:05:23 2012] XMMSAS bgd. selection expression = annulus(26438.283400, 27820.976200, 447.219013, 894.438026, X, Y)
[Wed Jun  6 03:05:23 2012] Writing fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2.gif
[Wed Jun  6 03:05:26 2012] Mean detx,y = (117.59, 24.15) 
[Wed Jun  6 03:05:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 03:05:33 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 03:05:33 2012] Setting source spectrum file to fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun  6 03:05:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun  6 03:14:21 2012] Updating aperture counts using extracted products
[Wed Jun  6 03:14:21 2012] Error reading totcts from fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun  6 03:14:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 03:14:21 2012] Using photon index=1.80, rate=0.00617, arf fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2.arf
[Wed Jun  6 03:14:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 03:14:21 2012] Updating source flux to 8.2e-14
[Wed Jun  6 03:14:33 2012] Reading fit data from xmm0604310301/analysis//spectral/fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun  6 03:14:33 2012] Spectral fit parameter nH value = 4.47535e+20
[Wed Jun  6 03:14:33 2012] Spectral fit parameter PhoIndex value = 1.67588
[Wed Jun  6 03:14:33 2012] Failed to get F(0.3-8.0) from xmm0604310301/analysis//spectral/fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun  6 03:14:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 03:14:33 2012] Using Nh = 4.5e+20, photon index=1.68, rate=0.00617, arf fullrun_mos2_xmm0604310301_pi300-10000_pass1_cl_src2.arf
[Wed Jun  6 03:14:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 03:14:33 2012] Updating source flux to 9.2e-14